[Gumstix-users] Warning when connecting using Kermit

[Stuart G. <stu...@gm...>]

When I issue the connect command using kermit and then apply power to the
expansion board I get:

Texas Instruments X-loader 1.4.2 .....
Reading boot sector
Loading u-boot.bin from mmc

U-Boot 2009.03 ( March 27 2009 - .....

OMAP3503 ....
Gumstix Overo board + LPDDR/NAND
DRAM:    256MB
NAND:    256MiB
*** Warning - bad CRC or NAND, using default environment

then it goes on to

readin boot.scr

** Unable to read "boot.scr" from mmc 0:1 **
reading uImage

2723292 bytes read
Booting from mmc

>From this point it seems to uncompress Linux and follow the boot process.

My hardware is the Overo Air with Tobi expansion board. When I get to the
login prompt it has failed to recognise ethernet, wi-fi and the display.

Is the warning given about the CRC a problem that could be causing this?

I have tried to reformat the disk and reload images downloaded from gumstix,
but it always gives the same error even if I boot from NAND.

Any ideas would be gratefully received.

Thanks,
Stuart