Re: [Gumstix-users] Connector for Overo Summit 40-pin header (SV1)

[John W. <joh...@er...>]

Gary,

Yes, thanks for the help!

John

> -----Original Message-----
> From: gnmckinney [mailto:gar...@gm...]
> Sent: Monday, March 30, 2009 7:23 PM
> To: gum...@li...
> Subject: Re: [Gumstix-users] Connector for Overo Summit 40-pin header
> (SV1)
> 
> 
> I have not checked yet but from just a visual it looks like the 40-pin
> location is the same as a PATA hard drive connection in terms of
> spacing.
> You could use a male connector on the summit board then use a PATA
hard
> drive cable to make the connections - or connect the other end of the
> cable
> to a breakout board.
> 
> One thing though - if you want to access the micro-SD socket on the
> overo
> board you probably will want to mount the socket on the BOTTOM side of
> the
> Summit board - otherwise you will block access to the micro-SD socket.
> 
> Just an idea.
> 
> gm...
> 
> 
> jpw3 wrote:
> >
> > I'd like to get a connector to use with the Overo Summit's 40-pin
> header
> > - something that will allow easier connections (screw terminals, for
> > instance).  Any pointers are appreiciated!
> >
> >
> >
> > Best regards,
> >
> >
> >
> > John
> >
> >
> >
---------------------------------------------------------------------
> ---------
> >
> > _______________________________________________
> > gumstix-users mailing list
> > gum...@li...
> > https://lists.sourceforge.net/lists/listinfo/gumstix-users
> >
> >
> 
> --
> View this message in context: http://www.nabble.com/Connector-for-
> Overo-Summit-40-pin-header-%28SV1%29-tp22791815p22795292.html
> Sent from the Gumstix mailing list archive at Nabble.com.
> 
> 
>
-----------------------------------------------------------------------
> -------
> _______________________________________________
> gumstix-users mailing list
> gum...@li...
> https://lists.sourceforge.net/lists/listinfo/gumstix-users