Re: [Gumstix-users] Which software to use to design small form factor prototype PCBs

[Linus C. <li...@li...>]

Try Eagle:
http://www.cadsoft.de/freeware.htm

On Sun, Dec 14, 2008 at 5:14 AM, Elvis Dowson <elv...@ma...> wrote:
> Hi,
>         Which software can I use to design small form factor PCBs, so that I
> can create my own expansion board to interface with the Overo motherboard.
> My requirements are quite simple, I just need to have a small PCB so that I
> can populate it with the following connectors for my Sharp LQ043T1DG01 LCD
> display module:
> a. Hirose FH12A-40S-0.5SH (55) Top contact type, for the TFT LCD panel
> b. 0.5mmP 4Pin FPC (Reference Connector: Kyocera Elco Corporation Product
> No.: 6298 Bottom contact type), for the LED back light
> c. 1mmP 4Pin FPC (Reference Connector: J.S.T. Mfg Co., Ltd, Product No.:
> 0.4(1.0)9FLH-SM1-GB-TB), for the touch panel
> Is there some software that already has all these connector parts
> pre-defined, so that I don't have to worry about dimensions, etc of the
> connectors? The pins on the FPC connectors are so tiny and closely spaced, I
> don't want to make a mistake in the PCB design, and I want to get it right
> the first time.
> Best regards,
> Elvis Dowson
> ------------------------------------------------------------------------------
> SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada.
> The future of the web can't happen without you.  Join us at MIX09 to help
> pave the way to the Next Web now. Learn more and register at
> http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/
> _______________________________________________
> gumstix-users mailing list
> gum...@li...
> https://lists.sourceforge.net/lists/listinfo/gumstix-users
>
>



-- 
Linus Casassa
Estudiante Ingeniería Civil Electrónica
Fono: 56-9-97776941