From: yipiha <yip...@gm...> - 2008-11-06 15:01:58
|
Sorry for my absence I solved my problem, the mistake the controle accept the 3v but the lcd don't accpet with the small tension adapter card, the lcd works fine thanks Dave. Dave Hylands wrote: > > Hi yipiha, > >> Can you give me the link of the datasheet because I can not find it > > I just googled for MDLS16265 and the 3rd link is this: > <http://cumbriadesigns.co.uk/Datasheets/MDLS16265-04.pdf> > >> I'm doing a small card from 3 to 5v the LDD through transistor. > > The data sheet says that anything over 2.2v is considered a logic > high, so you should be able to use the 3.3v signals directly. > > -- > Dave Hylands > Vancouver, BC, Canada > http://www.DaveHylands.com/ > > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's > challenge > Build the coolest Linux based applications with Moblin SDK & win great > prizes > Grand prize is a trip for two to an Open Source event anywhere in the > world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > -- View this message in context: http://www.nabble.com/LCD-2x16-characters-on-a-breakout-gs-tp18707346p20362727.html Sent from the Gumstix mailing list archive at Nabble.com. |