Re: [Gumstix-users] no route to host

[Bill C. <bcu...@oc...>]

Ooh, doing it oldschool eh?  (C-)Kermit should support zmodem, so just
need to install some zmodem utilities on the gumstix (which may prove
impossible if the application's not there in the first place).  Rz/sz
are were installed on my gumstix when I received it so you should be ok.
The commands you would run on the gumstix should be 'sz' to send a file
(from gumstix to your pc) or 'rz' (pc->gumstix), then from the Kermit
command-mode, you would use the SEND or RECEIVE commands.  Probably a
good idea to read up on the Kermit man page.

I did find this article that may help you : 
http://books.google.com/books?id=nAmR7Fc51mcC&pg=PA283&lpg=PA283&dq=kerm
it+rz&source=bl&ots=4g69FUu92t&sig=3bzrD6gFOmAoHCAqzZvYqh_uTzo&hl=en&sa=
X&oi=book_result&resnum=9&ct=result

Good luck

Bill

-----Original Message-----
Message: 2
Date: Thu, 16 Oct 2008 16:28:00 +0800
From: "Nyan Myo Naing" <mp...@nu...>
Subject: Re: [Gumstix-users] no route to host
To: <gum...@li...>
Message-ID:
	<6E7DB9984051D44D9B235574354DA37E059FF14B@MBX03.stf.nus.edu.sg>
Content-Type: text/plain; charset="iso-8859-1"

Thanks everybody, for your suggestion.
I set same subnet number. But it does not work.
I give up. It wasted a lot of my time.
Is there another option to copy a file to gusmtix, rather than using
scp?
Can I use kermit, if so how to use?
Rgds,
Nyan