From: WESS G. <zir...@ms...> - 2008-07-10 15:53:23
|
I left out some important details. I was updating uboot and buildroot when all this happened. I had a roboaudiostix and a tweener connected during the process. If I disconnect the roboaudiostix the connex400xm boots the new uboot/build root and everything works fine. However, it will not work through the roboaudiostix past the point described below. I actually have two connex400xm and both give the same behavior after the update. Thanks, Wess ---------------------------------------- > From: zir...@ms... > To: gum...@li... > Date: Thu, 10 Jul 2008 00:02:16 -0700 > Subject: [Gumstix-users] No response from U-Boot using Kermit > > > Hi Everyone, > > I forgot a connex400xm powered on all day. Before leaving to work it was working fine. I came back home and could not connect to it again. So I cycled the power and it immediately displayed the following without the autoboot countdown: > >> U-Boot 1.1.4 (Aug 1 2006 - 10:47:14) >> >> *** Welcome to Gumstix *** >> >> U-Boot code: A3F00000 -> A3F25D1C BSS: -> A3F5AE38 >> RAM Configuration: >> Bank #0: a0000000 64 MB >> Flash: 16 MB >> Using default environment >> >> SMC91C1111-0 >> Net: SMC91C1111-0 >> Hit any key to stop autoboot: 0 >> GUM> > > > I can not type anything at the GUM command line. I can escape to kermit but not back into the GUM command line. I have to cycle power again. Any thoughts? > > I would appreciate any help. I searched the threads but nothing obvious stood out. > > Cheers, > > Wess > > _________________________________________________________________ > It’s a talkathon – but it’s not just talk. > http://www.imtalkathon.com/?source=EML_WLH_Talkathon_JustTalk > ------------------------------------------------------------------------- > Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! > Studies have shown that voting for your favorite open source project, > along with a healthy diet, reduces your potential for chronic lameness > and boredom. Vote Now at http://www.sourceforge.net/community/cca08 > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users _________________________________________________________________ Use video conversation to talk face-to-face with Windows Live Messenger. http://www.windowslive.com/messenger/connect_your_way.html?ocid=TXT_TAGLM_WL_Refresh_messenger_video_072008 |