Re: [Gumstix-users] Logging on to the Verdex board

[Borre v. D. <bor...@gm...>]

Hi Shane,

The following link will help you:
http://www.gumstix.net/Software/view/Getting-started/Setting-up-a-serial-connection/111.html

The web site navigation is a bit confusing. There is actually quite a bit of
information there. It's worth while taking some time to go through it. Many
of the navigation links at the top of the screen that you think should lead
you to information, don't. If you scroll down the page and click on the
'read more' under the brief overviews you get to the good stuff. I found a
lot of it using google, but now that I know its there I can find it via the
menus. I ended up printing it all out for easy access.

Good luck.

Borre

On Wed, Jun 4, 2008 at 9:25 AM, Shane Kirkbride <ski...@uc...> wrote:

> Hi,
> Yesterday I connected the verdex board (Gumstix), the ethernet board,
> the consoleLCD-vx board and plugged in the consoleLCD-vx.  The verdex
> board booted linux, which appeared on the LCD! (this was a very
> exciting moment) But then it asked me to login, I need some sort of
> keyboard to do this. How do I connect a keyboard or a PC to log in?
> I'm sure a simple link would do; but I can't find one. Also, I had the
> same issue with the tweener board (as Asier), but my guess was that
> they are not meant to operate together. Thanks!
> ~Shane
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> _______________________________________________
> gumstix-users mailing list
> gum...@li...
> https://lists.sourceforge.net/lists/listinfo/gumstix-users
>