From: Mark B. <ma...@at...> - 2008-05-20 19:21:06
|
Mike Caruso wrote: > Hello list, > I was wondering if anybody knew how to build a custom kernel for a > Verdex running Open Embedded? I have a USB Ethernet adapter I'd like > to get working on my Verdex, it uses the RTL8150 driver. My first > thought was to try and add it to gumstix-custom-verdex.conf, but > wouldn't you need to enable it in the kernel config first so that it > knows to build that module? I found what appears to be the kernel > config in: > > ~/gumstix/gumstix-oe/tmp/work/gumstix-custom-verdex-angstrom-linux-gnueabi/gumstix-kernel-2.6.21-r1/linux-2.6.21 > > So let's say I modify that to include the RTL8150 driver (as a > module), how would I rebuild the Verdex image to include a kernel > built from that config? > > Thanks, > Mike > > ------------------------------------------------------------------------ > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > ------------------------------------------------------------------------ > > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > Hi Mike, http://gumstix.net/wiki/index.php?title=Kernel_Reconfiguration Not sure how complete since I have not tried this yet, but it might do the trick. Mark |