From: Gord U. <go...@gm...> - 2008-05-14 00:01:37
|
The gumstix-factory.script is the result of running mkimage against gumstix-factory.script.source. In gumstix/gumstix-oe/extras/cf-root you should also have a script makefactoryscript.sh that runs mkimage with the right parameters to produce gumstix-factory.script. If you want to buid your own rootfs and kernel images I found the following http://www.klc.net.nz/linux/?page_id=10 which mostly worked. I had to tweek a few things (I'll try find my notes) but in the end it all worked. gord On Mon, May 12, 2008 at 1:25 PM, Scott Lerman <sml...@gm...> wrote: > On Mon, May 12, 2008 at 2:48 PM, Steve Sakoman <sa...@gm...> wrote: > > Or even easier, pick up the tarballs from: > > > > http://www.sakoman.net/oe/cf-boot/ > > > > Steve > > > > > > > > On Mon, May 12, 2008 at 11:44 AM, Steve Sakoman <sa...@gm...> > wrote: > > > Take a look in your extras/cf-root directory for the script. > > > > > > Steve > > > > > > > > > > > > On Mon, May 12, 2008 at 11:34 AM, Scott Lerman <sml...@gm...> > wrote: > > > > The gumstix-factory.script from that wiki page has this: > > > > > > > > if mmcinit; then > > > > setenv bootargs console=ttyS0,115200n8 rootdelay=1 > root=/dev/mmcblk0p2 > > > > if fatload mmc 0 a2000000 uimage; then > > > > set workedok Success > > > > fi > > > > fi > > > > > > > > Since I'm using CF instead of MMC, does this look right: > > > > > > > > if pinit on; then > > > > setenv bootargs rw console=ttyS0,115200n8 reboot=cold,hard > MEDIA=CF > > > > if fatload ide 0 a2000000 uimage; then > > > > set workedok Success > > > > fi > > > > fi > > > > > > > > > > > > > > > > -- > > > > Scott Lerman > > > > > > > > > ------------------------------------------------------------------------- > > > > This SF.net email is sponsored by: Microsoft > > > > Defy all challenges. Microsoft(R) Visual Studio 2008. > > > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > > > _______________________________________________ > > > > gumstix-users mailing list > > > > gum...@li... > > > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > > > > > > > > > ------------------------------------------------------------------------- > > This SF.net email is sponsored by: Microsoft > > Defy all challenges. Microsoft(R) Visual Studio 2008. > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > _______________________________________________ > > gumstix-users mailing list > > gum...@li... > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > Looks good, thanks. I noticed in the gumstix-factory.script that > there's a bunch of garbage characters at the top of the file. Is that > the uboot header that I vaguely remember reading about? > > -- > Scott Lerman > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > |