Re: [Gumstix-users] netmicrosd-vx : ethernet won't connect

[Don A. <do...@gu...>]

You wrote:

"The PCB version is PCB10039-R1700 (which coincides with the "known issues"
described in http://www.gumstix.net/Hardware/cat/Known-issues/112.html) BUT
the U11 chip has "WB4245" as a second line.

Is this an RMA?"


My answer = No, this is not an RMA as per this known issue as your chip is
labelled "WB4245" not "WBH4245".


Don
++++++++++


On Mon, Mar 31, 2008 at 6:13 PM, David Orchansky <eld...@ho...>
wrote:

>  Hi,
>
> I've recently purchased an LCD pack, which was supposed to came with a
> netmicroSD (although in the board it is labeled as "netwifiuSD-vx")
>
> Anyway, It seems to have some issues when trying to retrieve an IP
> address during the dhcp discovery. BUT if I set a fixed IP, it works
> [partially] ok (I can ping it with no problem).
>
> If I try to ssh into it, it will crash, and reboot for ever until I unplug
> the network cable, and set a fixed IP again. At some point I managed to ssh
> into it, but this is by chance...
>
> In u-Boot the dhcp command works, but it doesn't retrieve an IP either.
>
> u-Boot version seems to be fine (release 1587), and drivers are ok (it
> worked fine at least with the fixed IP)
>
> The PCB version is PCB10039-R1700 (which coincides with the "known
> issues"  described in
> http://www.gumstix.net/Hardware/cat/Known-issues/112.html) BUT the U11
> chip has "WB4245" as a second line.
>
> Is this an RMA?
>
> Thanks,
> David.
>
>
> > Date: Mon, 31 Mar 2008 15:01:34 -0700
> > From: na...@ya...
> > To: gum...@li...
> > Subject: Re: [Gumstix-users] netmicrosd-vx : ethernet won't connect
>
> >
> >
> > Giles,
> >
> > My netmicrosd didn't work but I didn't get the same dmesg as yours
> > so you may not need RMA (however I got RMA). You can check your network
> > connection
> > in uboot using command dhcp as well.
> > Check my latest post here:
> >
> http://www.nabble.com/Need-help-with-my-new-LCDPACK-td16317491.html#a16317491
> >
> > Goodluck,
> >
> > Ali
> >
> >
> > Giles Biddison wrote:
> > >
> > > Hello, I am running into trouble with a brand new netmicrosd-vx from
> the
> > > gumstix "starter pack"
> > >
> > > Power lights come on on both verdex mb and netmicrosd.
> > > It boots, and I can connect via console no problems.
> > >
> > > However there are no link lights on the netmicrosd, and wireshark
> shows no
> > > traffic when it tries to get its dhcp lease.
> > > I've tried setting a static IP and that does not work either.
> > > I have check the cables.
> > >
> > > Now I just noticed that dmesg shows this info:
> > >
> > > <3>gumstix_smc91x_init: smc91x chip not found, returning -ENXIO
> > > <4>smc91x: Unknown symbol gumstix_smc91x_load
> > > <4>eth0: LAN9117 (rev 2) at 0xc4870000 IRQ 131
> > > <4>eth0: Ethernet addr: a2:cb:58:e5:6d:10
> > > <7>eth0: No PHY found
> > >
> > >
> > >
> > > No PHY found has me worried. Is this an RMA or is there some hope
> here?
> > >
> > >
> > >
> > > Giles. Biddison
> > >
> > >
> -------------------------------------------------------------------------
>
>
>
> ------------------------------
> How well do you know your celebrity gossip? Talk celebrity smackdowns
> here. <http://originals.msn.com/thebigdebate?ocid=T002MSN03N0707A>
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
>
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
> _______________________________________________
> gumstix-users mailing list
> gum...@li...
> https://lists.sourceforge.net/lists/listinfo/gumstix-users
>
>