From: Stafford W. <sta...@gm...> - 2008-02-20 02:57:41
|
Yeah, no fix there. > -----Original Message----- > From: gum...@li... [mailto:gumstix-users- > bo...@li...] On Behalf Of Steve Sakoman > Sent: Wednesday, 20 February 2008 3:49 p.m. > To: General mailing list for gumstix users. > Subject: Re: [Gumstix-users] Problems > withEthernetonarecentlyreflashedConnex400 xm with netMMC & console-st > > Do: > > ipkg remove boa > > I really doubt it will make a difference, but it is worth a try. > > Steve > > On Feb 19, 2008 6:33 PM, Stafford Williams <sta...@gm...> > wrote: > > Unfortunately the revised module only changes the timeout to 5 seconds. > > > > I have a boot.log of the currnet boot (including the modprobe fix > afterwards > > to bring eth0 back up), but I've just installed samba on my linux box > and > > now refuses to accept scp connections, so the log is stuck on the > gumstix > > atm. > > > > The errors echo immediately after the following in the bootlog; > > > > <4>cfio: module license 'unspecified' taints kernel. > > <4>Before register driver > > <4>After register driver > > > > The errors first arrive when observing bootup when boa is attempting to > > start so I thought that might have something to do with it.. > > > > ipkg remove boa_0.94.13-r3_armv5te.ipk or > > ipkg -recursive remove boa_0.94.13-r3_armv5te.ipk > > > > .. removes no packages for me however. > > > > Cheers, > > Stafford. > > > > > > > > > > > > Doh! I'm an idiot :-) > > > > > > The smc91x driver isn't built into the kernel. It is a module, so > > > reflashing the kernel accomplished nothing! > > > > > > I've posted an ipkg for the revised module at: > > > > > > http://www.sakoman.net/oe/kernel-module-smc91x_2.6.21-r1_gumstix- > custom- > > > connex.ipk > > > > > > I'm so sorry for wasting your time on that reflash. > > > > > > Just download the ipkg to your gumstix and: > > > > > > ipkg -force-reinstall install > > > kernel-module-smc91x_2.6.21-r1_gumstix-custom-connex.ipk > > > > > > Then you should see 5 second timeouts (or hopefully even no timeouts > :-) > > > > > > Steve > > > > > > > > > > > > > > > On Feb 19, 2008 4:21 PM, Stafford Williams > <sta...@gm...> > > > wrote: > > > > > > > > I did: > > > > > > > > loadb a2000000 > > > > <send image> > > > > katinstall 100000 > > > > katload 100000 > > > > bootm > > > > > > > > On boot, the timeouts came up every 1 second again (when previously > > > after > > > > flashing rootfs & kernel they would come up only after the 2nd boot. > > > > > > > > Am I doing the flash incorrectly? > > > > > > > > Cheers, > > > > Stafford. > > > > > > > > > > > > > > > > > I've posted a connex uimage that has a 5 second timeout (rather > than 1 > > > > > second): > > > > > > > > > > http://www.sakoman.net/oe/uImage-2.6.21-r1-gumstix-custom- > connex.bin > > > > > > > > > > It should work fine with any fairly recent rootfs. You'll only > need > > > > > to reflash the kernel, you don't need to do the rootfs too. > > > > > > > > > > Let me know if this has any effect on your timeout errors (other > than > > > > > making them print every five seconds rather than every second :-) > > > > > > > > > > Steve > > > > > > > > > > On Feb 19, 2008 2:32 PM, Steve Sakoman <sa...@gm...> wrote: > > > > > > Chris, > > > > > > > > > > > > There isn't a patch that sets that timeout -- it comes set that > way > > > in > > > > > > the linux tarball. > > > > > > > > > > > > I've prepared a patch to extend the timeout and I'm rebuilding > right > > > > > > now. I'll post it so everyone doesn't need to rebuild in order > to > > > > > > give it a try. > > > > > > > > > > > > Steve > > > > > > > > > > > > > > > > > > On Feb 19, 2008 2:23 PM, Chris Dollar <chr...@gm...> > > > wrote: > > > > > > > Sorry Stafford - should have read a bit closer. > > > > > > > > > > > > > > The thing to do would be to look in > > > > > > > <gumstix-oe>/com.gumstix.collection/packages/linux/gumstix- > kernel- > > > ?? > > > > > > > This is where kernel patches live, so you'll either have to > create > > > a > > > > > > > patch and modify the bb file to include it, or if you're > really > > > lucky > > > > > > > that patch might be in that directory and you could just edit > it > > > and > > > > > > > then bitbake -c rebuild. > > > > > > > > > > > > > > Chris > > > > > > > > > > > > > > > > > > > > > On Feb 19, 2008 3:26 PM, Stafford Williams > > > > > <sta...@gm...> wrote: > > > > > > > > Thanks Chris, > > > > > > > > > > > > > > > > After this rebuild it has changed the timeout in > > > > > > > > ~/gumstix/gumstix-oe/tmp/work/gumstix-custom-connex- > angstrom- > > > linux- > > > > > gnueabi/g > > > > > > > > umstix-kernel-2.6.21-r1/linux-2.6.21/drivers/net/smc91x.c > back > > > to > > > > > 1000 > > > > > > > > however. > > > > > > > > > > > > > > > > I assume I should be editing a different file to compile the > > > change > > > > > into the > > > > > > > > build? Do you know where I can find the correct file to > edit? > > > > > > > > > > > > > > > > Cheers, > > > > > > > > Stafford. > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > From: gum...@li... > > > [mailto:gumstix- > > > > > users- > > > > > > > > > bo...@li...] On Behalf Of Chris Dollar > > > > > > > > > Sent: Wednesday, 20 February 2008 11:00 a.m. > > > > > > > > > To: General mailing list for gumstix users. > > > > > > > > > Subject: Re: [Gumstix-users] Problems with Ethernet on > > > > > > > > > > > > > > > > > arecentlyreflashedConnex400 xm with netMMC & console-st > > > > > > > > > > > > > > > > > > just 'bitbake -c rebuild gumstix-kernel' > > > > > > > > > > > > > > > > > > Chris > > > > > > > > > > > > > > > > > > On Feb 19, 2008 3:08 PM, Stafford Williams > > > > > <sta...@gm...> > > > > > > > > > wrote: > > > > > > > > > > This error is occurring every second for me. > > > > > > > > > > I found a copy of smc91x.c here: > > > > > > > > > > > > > > > > > > > > > > > > > http://www.gelato.unsw.edu.au/lxr/source/drivers/net/smc91x.c > > > > > > > > > > > > > > > > > > > > Notice that lines 128-131 say the default is 5 seconds, > but > > > have > > > > > > > > > watchdog > > > > > > > > > > set to 1000. > > > > > > > > > > > > > > > > > > > > I found the copy in the svn on my machine under: > > > > > > > > > > > > > > > > > > > > ~/gumstix/gumstix-oe/tmp/work/gumstix-custom-connex- > > > angstrom- > > > > > linux- > > > > > > > > > gnueabi/g > > > > > > > > > > umstix-kernel-2.6.21-r1/linux- > 2.6.21/drivers/net/smc91x.c > > > > > > > > > > > > > > > > > > > > ..and noticed that this timeout is set to 1000 too. I > have > > > > > changed the > > > > > > > > > > timeout to 5000 and ran bitbake (this is clearly > incorrect) > > > to > > > > > no > > > > > > > > > affect. > > > > > > > > > > Quick description on how/where to compile this file that > > > bitbake > > > > > will > > > > > > > > > > realize a change anyone? :) > > > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > > Stafford. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Do these messages come about once every 5 seconds? > > > Looking at > > > > > the > > > > > > > > > > > driver source I see: > > > > > > > > > > > > > > > > > > > > > > /* > > > > > > > > > > > * Transmit timeout, default 5 seconds. > > > > > > > > > > > */ > > > > > > > > > > > static int watchdog = 5000; > > > > > > > > > > > module_param(watchdog, int, 0400); > > > > > > > > > > > MODULE_PARM_DESC(watchdog, "transmit timeout in > > > > > milliseconds"); > > > > > > > > > > > > > > > > > > > > > > Seems like a plenty long timeout, so I doubt > increasing it > > > > > would make > > > > > > > > > > > any difference. Just want to verify that the message > > > timing > > > > > matches > > > > > > > > > > > what you are seeing. > > > > > > > > > > > > > > > > > > > > > > Steve > > > > > > > > > > > > > > > > > > > > > > On Feb 18, 2008 11:11 PM, Stafford Williams > > > > > > > > > <sta...@gm...> > > > > > > > > > > > wrote: > > > > > > > > > > > > I've just flashed (now twice) the latest OE to my > connex > > > 200 > > > > > w/ > > > > > > > > > netCF & > > > > > > > > > > > > console-st, and have found similar, if not identical > > > issues. > > > > > > > > > > > > > > > > > > > > > > > > On first boot after flashing, the unit does not > connect > > > > > until issued > > > > > > > > > an > > > > > > > > > > > > "ifup eth0" from console. Once this is issued, it > > > correctly > > > > > obtains > > > > > > > > > a > > > > > > > > > > > DHCP > > > > > > > > > > > > address and can communicate over the network > interface. > > > > > > > > > > > > > > > > > > > > > > > > Upon power-cycling again, every boot afterwards > seems to > > > > > bring up > > > > > > > > > the > > > > > > > > > > > eth0 > > > > > > > > > > > > link (and obtain a DHCP lease), then halfway through > > > booting > > > > > it > > > > > > > > > starts > > > > > > > > > > > > flooding the console with > > > > > > > > > > > > > > > > > > > > > > > > NETDEV WATCHDOG: eth0: transmit timed out > > > > > > > > > > > > Auto negotiation NOT supported > > > > > > > > > > > > > > > > > > > > > > > > I have tested this on a 3COM router and a Belkin > router, > > > > > with > > > > > > > > > different > > > > > > > > > > > > cables: still the same result. > > > > > > > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > > > > Stafford. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > > From: gum...@li... > > > > > [mailto:gumstix- > > > > > > > > > > > users- > > > > > > > > > > > > > bo...@li...] On Behalf Of Steve > > > Sakoman > > > > > > > > > > > > > Sent: Tuesday, 19 February 2008 7:12 p.m. > > > > > > > > > > > > > To: General mailing list for gumstix users. > > > > > > > > > > > > > Subject: Re: [Gumstix-users] Problems with > Ethernet on > > > a > > > > > recently > > > > > > > > > > > > > > > > > > > > > > > > > reflashedConnex400 xm with netMMC & console-st > > > > > > > > > > > > > > > > > > > > > > > > > > I haven't been able to reproduce this. I wonder > if it > > > > > might be > > > > > > > > > > > > > related to the router the netMMC is connected to? > > > Have > > > > > you tried > > > > > > > > > > > > > other routers to see if there is any difference in > > > > > behavior? I'm > > > > > > > > > > > > > connecting to a Netgear router. Maybe a cable not > up > > > to > > > > > 100mb > > > > > > > > > > > > > standards? Just throwing out ideas . . . > > > > > > > > > > > > > > > > > > > > > > > > > > Looking at the driver source, it seems the Auto > > > > > negotiation > > > > > > > > > message is > > > > > > > > > > > > > related to detecting 10 vs 100 ethernet. > > > > > > > > > > > > > > > > > > > > > > > > > > I diff-ed the smc91x driver vs the latest version > in > > > the > > > > > 2.6.24 > > > > > > > > > kernel > > > > > > > > > > > > > and found that they are essentially identical. So > no > > > > > fixes have > > > > > > > > > made > > > > > > > > > > > > > it into the upstream driver. > > > > > > > > > > > > > > > > > > > > > > > > > > Steve > > > > > > > > > > > > > > > > > > > > > > > > > > On Feb 18, 2008 4:49 PM, Yuvraj Agarwal > > > <yu...@uc...> > > > > > wrote: > > > > > > > > > > > > > > Steve - It seems that when I flash a new image > > > Ethernet > > > > > works > > > > > > > > > for > > > > > > > > > > > the > > > > > > > > > > > > > first > > > > > > > > > > > > > > time. > > > > > > > > > > > > > > When I then reboot the gumstix it doesn't quite > work > > > and > > > > > gives > > > > > > > > > all > > > > > > > > > > > the > > > > > > > > > > > > > > messages during > > > > > > > > > > > > > > bootup also, making it extremely slow to boot. > > > > > > > > > > > > > > > > > > > > > > > > > > > > Auto negotiation NOT supported > > > > > > > > > > > > > > NETDEV WATCHDOG: eth0: transmit timed out > > > > > > > > > > > > > > > > > > > > > > > > > > > > I dug deeper and it seems that if I force remove > the > > > > > smc91x > > > > > > > > > module I > > > > > > > > > > > get > > > > > > > > > > > > > a > > > > > > > > > > > > > > bunch of > > > > > > > > > > > > > > errors, because there is not a proper release > > > function > > > > > in the > > > > > > > > > driver > > > > > > > > > > > and > > > > > > > > > > > > > > also after > > > > > > > > > > > > > > that if I modprobe and install the Ethernet > module > > > > > (smc91x) > > > > > > > > > again > > > > > > > > > > > and do > > > > > > > > > > > > > an > > > > > > > > > > > > > > "ifup eth0" > > > > > > > > > > > > > > it does start to work. > > > > > > > > > > > > > > > > > > > > > > > > > > > > Just thought I'd pass this information along to > see > > > if > > > > > it helps. > > > > > > > > > > > > > > > > > > > > > > > > > > > > thanks > > > > > > > > > > > > > > yuvraj > > > > > > > > > > > > > > > > > > > > > > > > > > > > ******************************** > > > > > > > > > > > > > > Auto negotiation NOT supported > > > > > > > > > > > > > > NETDEV WATCHDOG: eth0: transmit timed out > > > > > > > > > > > > > > eth0: TX timeout (INT 0x00 INTMASK 0x00 MEM > 0x0404 > > > FIFO > > > > > 0x8000 > > > > > > > > > > > EPH_ST > > > > > > > > > > > > > > 0x0000) > > > > > > > > > > > > > > > > > > > > > > > > > > > > root@gumstix-custom-connex:~$ lsmod > > > > > > > > > > > > > > Module Size Used by > > > > > > > > > > > > > > i2c_dev 6052 0 > > > > > > > > > > > > > > i2c_pxa 6720 0 > > > > > > > > > > > > > > i2c_core 17104 2 i2c_dev,i2c_pxa > > > > > > > > > > > > > > mcf25 197712 0 > > > > > > > > > > > > > > cfio 4928 1 mcf25 > > > > > > > > > > > > > > vfat 10080 0 > > > > > > > > > > > > > > fat 46332 1 vfat > > > > > > > > > > > > > > nls_base 6688 2 vfat,fat > > > > > > > > > > > > > > pxa2xx_cs 2916 1 > > > > > > > > > > > > > > pxa2xx_core 10304 1 pxa2xx_cs > > > > > > > > > > > > > > proc_gpio 7084 0 > > > > > > > > > > > > > > pcmcia 25288 1 cfio > > > > > > > > > > > > > > pcmcia_core 31024 4 > > > > > mcf25,cfio,pxa2xx_core,pcmcia > > > > > > > > > > > > > > firmware_class 7520 1 pcmcia > > > > > > > > > > > > > > g_ether 25296 0 > > > > > > > > > > > > > > smc91x 16616 0 > > > > > > > > > > > > > > mii 4704 1 smc91x > > > > > > > > > > > > > > gumstix_smc91x 2752 1 smc91x > > > > > > > > > > > > > > pxa2xx_udc 16516 1 g_ether > > > > > > > > > > > > > > gumstix_gadget 1344 1 pxa2xx_udc > > > > > > > > > > > > > > > > > > > > > > > > > > > > root@gumstix-custom-connex:~$ ifdown eth0 (<-- > > > This > > > > > makes the > > > > > > > > > > > messages > > > > > > > > > > > > > > stop) > > > > > > > > > > > > > > > > > > > > > > > > > > > > root@gumstix-custom-connex:~$ ifup eth0 > > > > > > > > > > > > > > Auto negotiation NOT supported > > > > > > > > > > > > > > eth0 no wireless extensions. > > > > > > > > > > > > > > > > > > > > > > > > > > > > udhcpc (v1.2.1) started > > > > > > > > > > > > > > Sending discover... > > > > > > > > > > > > > > Sending discover... > > > > > > > > > > > > > > Sending discover... > > > > > > > > > > > > > > No lease, failing. (<-- Now it doesn't want > to > > > get > > > > > DHCP > > > > > > > > > > > leases.... ) > > > > > > > > > > > > > > root@gumstix-custom-connex:~$ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > root@gumstix-custom-connex:~$ modprobe -rv > smc91x > > > > > > > > > > > > > > rmmod > > > /lib/modules/2.6.21/kernel/drivers/net/smc91x.ko > > > > > > > > > > > > > > rmmod > /lib/modules/2.6.21/kernel/drivers/net/mii.ko > > > > > > > > > > > > > > rmmod /lib/modules/2.6.21/kernelDevice > 'smc91x.0' > > > does > > > > > not have > > > > > > > > > a > > > > > > > > > > > > > release() > > > > > > > > > > > > > > function, it is broken and must be fixed. > > > > > > > > > > > > > > /drivers/net/gumstix-smc91x.ko > > > > > > > > > > > > > > BUG: at drivers/base/core.c:106 device_release() > > > > > > > > > > > > > > [<c001f6b8>] (dump_stack+0x0/0x14) from > [<c00fee00>] > > > > > > > > > > > > > > (device_release+0x80/0x94) > > > > > > > > > > > > > > [<c00fed80>] (device_release+0x0/0x94) from > > > [<c00d81bc>] > > > > > > > > > > > > > > (kobject_cleanup+0x68/0x84) > > > > > > > > > > > > > > [<c00d8154>] (kobject_cleanup+0x0/0x84) from > > > > > [<c00d81ec>] > > > > > > > > > > > > > > (kobject_release+0x14/0x18) > > > > > > > > > > > > > > r7 = C356FF34 r6 = C356E000 r5 = C00D81D8 r4 > = > > > > > BF0087E8 > > > > > > > > > > > > > > [<c00d81d8>] (kobject_release+0x0/0x18) from > > > > > [<c00d91a4>] > > > > > > > > > > > > > > (kref_put+0x84/0xa0) > > > > > > > > > > > > > > [<c00d9120>] (kref_put+0x0/0xa0) from > [<c00d814c>] > > > > > > > > > > > > > (kobject_put+0x20/0x28) > > > > > > > > > > > > > > r5 = 00000000 r4 = BF008760 > > > > > > > > > > > > > > [<c00d812c>] (kobject_put+0x0/0x28) from > > > [<c00ff020>] > > > > > > > > > > > > > (put_device+0x1c/0x20) > > > > > > > > > > > > > > [<c00ff004>] (put_device+0x0/0x20) from > [<c0103af0>] > > > > > > > > > > > > > > (platform_device_put+0x1c/0x20) > > > > > > > > > > > > > > [<c0103ad4>] (platform_device_put+0x0/0x20) from > > > > > [<c0103b74>] > > > > > > > > > > > > > > (platform_device_unregister+0x20/0x24) > > > > > > > > > > > > > > [<c0103b54>] > (platform_device_unregister+0x0/0x24) > > > from > > > > > > > > > [<bf00803c>] > > > > > > > > > > > > > > (cleanup_module+0x2c/0x3c [gumstix_smc91x]) > > > > > > > > > > > > > > r4 = BF008940 > > > > > > > > > > > > > > [<bf008010>] (cleanup_module+0x0/0x3c > > > [gumstix_smc91x]) > > > > > from > > > > > > > > > > > > > [<c004e114>] > > > > > > > > > > > > > > (sys_delete_module+0x1b4/0x1e4) > > > > > > > > > > > > > > [<c004df60>] (sys_delete_module+0x0/0x1e4) from > > > > > [<c001ac60>] > > > > > > > > > > > > > > (ret_fast_syscall+0x0/0x2c) > > > > > > > > > > > > > > r8 = C001AE08 r7 = 00000081 r6 = 00015480 r5 > = > > > > > 00000000 > > > > > > > > > > > > > > r4 = 00015430 > > > > > > > > > > > > > > root@gumstix-custom-connex:~$ > > > > > > > > > > > > > > > > > > > > > > > > > > > > root@gumstix-custom-connex:~$ ifup eth0 > > > > > > > > > > > > > > eth0: link down > > > > > > > > > > > > > > eth0 no wireless extensions. > > > > > > > > > > > > > > > > > > > > > > > > > > > > udhcpc (v1.2.1) started > > > > > > > > > > > > > > Sending discover... > > > > > > > > > > > > > > eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 > > > > > > > > > > > > > > Sending discover... > > > > > > > > > > > > > > Sending select for *.*.*.*. (Yuvraj-removed) ... > > > > > > > > > > > > > > Lease of *.*.*.*. (Yuvraj-removed) (removed) > > > obtained, > > > > > lease > > > > > > > > > time > > > > > > > > > > > 86400 > > > > > > > > > > > > > > adding dns *.*.*.*. (Yuvraj-removed) > > > > > > > > > > > > > > adding dns *.*.*.*. (Yuvraj-removed) > > > > > > > > > > > > > > root@gumstix-custom-connex:~$ ping > www.google.com > > > > > > > > > > > > > > PING www.l.google.com (209.85.173.104): 56 data > > > bytes > > > > > > > > > > > > > > 64 bytes from 209.85.173.104: icmp_seq=0 ttl=239 > > > > > time=33.2 ms > > > > > > > > > > > > > > > > > > > > > > > > > > > > --- www.l.google.com ping statistics --- > > > > > > > > > > > > > > 1 packets transmitted, 1 packets received, 0% > packet > > > > > loss > > > > > > > > > > > > > > round-trip min/avg/max = 33.2/33.2/33.2 ms > > > > > > > > > > > > > > root@gumstix-custom-connex:~$ > > > > > > > > > > > > > > root@gumstix-custom-connex:~$ > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > > > From: gumstix-users- > bo...@li... > > > > > > > > > > > > > > [mailto:gumstix-users- > bo...@li...] > > > On > > > > > Behalf > > > > > > > > > Of > > > > > > > > > > > Steve > > > > > > > > > > > > > > Sakoman > > > > > > > > > > > > > > Sent: Monday, February 18, 2008 11:11 AM > > > > > > > > > > > > > > To: General mailing list for gumstix users. > > > > > > > > > > > > > > Subject: Re: [Gumstix-users] Problems with > Ethernet > > > on a > > > > > > > > > recently > > > > > > > > > > > > > reflashed > > > > > > > > > > > > > > Connex400 xm with netMMC & console-st > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I also have a connex 400 +netMMC and am > seeing > > > > > similar > > > > > > > > > issues. > > > > > > > > > > > Did > > > > > > > > > > > > > this > > > > > > > > > > > > > > get > > > > > > > > > > > > > > > resolved? > > > > > > > > > > > > > > > I would really appreciate any pointers on > fixing > > > this > > > > > issue if > > > > > > > > > you > > > > > > > > > > > did > > > > > > > > > > > > > > .... > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'm not seeing this, but I'll try to reproduce > it. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > But when I flash the image on my connex I get > an > > > older > > > > > version > > > > > > > > > > > number > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > Is it time to nuke "tmp" and rebuild from > scratch > > > ? > > > > > > > > > > > > > > > > > > > > > > > > > > > > You'd have to bitbake -c rebuild version in > order to > > > get > > > > > > > > > > > > > > /etc/gumstix-version to update. > > > > > > > > > > > > > > > > > > > > > > > > > > > > Steve > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------ > ---- > > > ---- > > > > > -------- > > > > > > > > > ---- > > > > > > > > > > > ---- > > > > > > > > > > > > > - > > > > > > > > > > > > > > This SF.net email is sponsored by: Microsoft > > > > > > > > > > > > > > Defy all challenges. Microsoft(R) Visual Studio > > > 2008. > > > > > > > > > > > > > > > > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > > gumstix-users mailing list > > > > > > > > > > > > > > gum...@li... > > > > > > > > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/gumstix- > > > > > users > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------ > ---- > > > ---- > > > > > -------- > > > > > > > > > ---- > > > > > > > > > > > ---- > > > > > > > > > > > > > - > > > > > > > > > > > > > > This SF.net email is sponsored by: Microsoft > > > > > > > > > > > > > > Defy all challenges. Microsoft(R) Visual Studio > > > 2008. > > > > > > > > > > > > > > > > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > > gumstix-users mailing list > > > > > > > > > > > > > > gum...@li... > > > > > > > > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/gumstix- > > > > > users > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -------------------------------------------------- > ---- > > > ---- > > > > > -------- > > > > > > > > > ---- > > > > > > > > > > > --- > > > > > > > > > > > > > This SF.net email is sponsored by: Microsoft > > > > > > > > > > > > > Defy all challenges. Microsoft(R) Visual Studio > 2008. > > > > > > > > > > > > > > > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > gumstix-users mailing list > > > > > > > > > > > > > gum...@li... > > > > > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/gumstix- > > > users > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------- > ---- > > > ---- > > > > > -------- > > > > > > > > > ---- > > > > > > > > > > > - > > > > > > > > > > > > This SF.net email is sponsored by: Microsoft > > > > > > > > > > > > Defy all challenges. Microsoft(R) Visual Studio > 2008. > > > > > > > > > > > > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > gumstix-users mailing list > > > > > > > > > > > > gum...@li... > > > > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/gumstix- > > > users > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------ > ---- > > > ---- > > > > > -------- > > > > > > > > > --- > > > > > > > > > > > This SF.net email is sponsored by: Microsoft > > > > > > > > > > > Defy all challenges. Microsoft(R) Visual Studio 2008. > > > > > > > > > > > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > gumstix-users mailing list > > > > > > > > > > > gum...@li... > > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/gumstix- > users > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -------------------------------------------------------- > ---- > > > ---- > > > > > -------- > > > > > > > > > - > > > > > > > > > > > > > > > > > > > > This SF.net email is sponsored by: Microsoft > > > > > > > > > > Defy all challenges. Microsoft(R) Visual Studio 2008. > > > > > > > > > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > > > > > > > > > _______________________________________________ > > > > > > > > > > gumstix-users mailing list > > > > > > > > > > gum...@li... > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/gumstix- > users > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > ---- > > > ---- > > > > > ------- > > > > > > > > > > > > > > > > > This SF.net email is sponsored by: Microsoft > > > > > > > > > Defy all challenges. Microsoft(R) Visual Studio 2008. > > > > > > > > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > > > > > > > > _______________________________________________ > > > > > > > > > gumstix-users mailing list > > > > > > > > > gum...@li... > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------ > ---- > > > ---- > > > > > ----- > > > > > > > > This SF.net email is sponsored by: Microsoft > > > > > > > > Defy all challenges. Microsoft(R) Visual Studio 2008. > > > > > > > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > > > > > > > _______________________________________________ > > > > > > > > gumstix-users mailing list > > > > > > > > gum...@li... > > > > > > > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > > > > > > > > > > > > > > > > > > > -------------------------------------------------------------- > ---- > > > ---- > > > > > --- > > > > > > > > > > > > > > This SF.net email is sponsored by: Microsoft > > > > > > > Defy all challenges. Microsoft(R) Visual Studio 2008. > > > > > > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > > > > > > _______________________________________________ > > > > > > > gumstix-users mailing list > > > > > > > gum...@li... > > > > > > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------ > ---- > > > --- > > > > > > > > > This SF.net email is sponsored by: Microsoft > > > > > Defy all challenges. Microsoft(R) Visual Studio 2008. > > > > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > > > > _______________________________________________ > > > > > gumstix-users mailing list > > > > > gum...@li... > > > > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > > > > > > > > > -------------------------------------------------------------------- > ---- > > > - > > > > This SF.net email is sponsored by: Microsoft > > > > Defy all challenges. Microsoft(R) Visual Studio 2008. > > > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > > > _______________________________________________ > > > > gumstix-users mailing list > > > > gum...@li... > > > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > > > > > > > ---------------------------------------------------------------------- > --- > > > > > This SF.net email is sponsored by: Microsoft > > > Defy all challenges. Microsoft(R) Visual Studio 2008. > > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > > _______________________________________________ > > > gumstix-users mailing list > > > gum...@li... > > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > > > ------------------------------------------------------------------------ > - > > This SF.net email is sponsored by: Microsoft > > Defy all challenges. Microsoft(R) Visual Studio 2008. > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > _______________________________________________ > > gumstix-users mailing list > > gum...@li... > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users |