From: Dave H. <dhy...@gm...> - 2008-02-12 01:02:45
|
Hi Justin, > I'm having trouble getting receive to work on the stuart on the gumstix. > I'm trying to run the sertest sample program using ttyS2 and it does not > seem to print the incoming data. I have tested it in a variety of > configurations, and it appears that I can send data out from the gumstix to > a pc just fine but not vice versa. Even if I attempt a simple loopback by > shorting Tx and Rx together, I do not see the duplicated character. I've > also tried sending data from an atmel microcontroller to the gumstix with > still no success. There were some versions of the breakout-gs which had the STUART and I2C ports mislabelled. Seems it was R277 <http://docswiki.gumstix.com/Breakout> Otherwise, if you're shorting Tx & Rx on the breakout-gs and not seeing the characters coming back then there is something wrong. I assume that when you're trying to send data to the PC that you're using a serial adapter? Do you have any other daughtercards you could try, to help isolate the problem? -- Dave Hylands Vancouver, BC, Canada http://www.DaveHylands.com/ |