From: Angel R. <ang...@md...> - 2008-02-06 21:10:28
|
Hi Everyone, What's the purpose of the serial port on the Verdex+JTAG board? I noticed it is not being used as the boot console. Is it simply to provide access to one of the UARTS on the pxa270? Regards, Angel Michael Johnson wrote: > Hi Dave, > > Doh - we wondered what the springy pins were for :-> > > Many thanks > Michael > >>> Has anyone managed to do anything with the Verdex board+JTAG expansion >>> board? >>> >>> I tried and couldn't read the JTAG device id - a process that I know >>> works on other PXA270 boards. >>> >>> It smells a bit like a power supply problem. I'm powering the JTAG board >>> at 5V which I hope would power the Verdex board - the JTAG vref pin is >>> 3.3V which supports my hope. >> > > I haven't done anything with mine either, but just to clarify, there > is a 60-pin hirose connector on the JTAG board. That isn't for the > device being programmed to plug into. The device being programmed > needs to sit on the "pins". > > -- Dave Hylands Vancouver, BC, Canada http://www.DaveHylands.com/ > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > |