From: Jeff T. <je...@jt...> - 2008-02-01 04:18:22
|
Ok, thanks to Dave Hylands I'm up and running on a modified 1533 image, both eth0 and mwlan0 now work and I'm a happy camper ;-) Oh, and Hyperterm's kermit worked just fine, confirm your downloads with crc32 just to be sure. JT Jeff Tyler wrote: > To follow up on this, the most current pre-built release on sourceforge > seems to be, wait for it, 1410! Wonderful... So I get to roll my own to > get the netwifimicroSD-vx card working, right? Arrghhh... > > I have a verdex 400 running the 1410 release. I have both a netcf-vx and a > netwifimicroSD-vx, neither one of which works under 1410. It would be nice > if someone would put a pre-built binary up there that allowed these cards > to work... > > If I'm missing something here (quite possible) some one please tell me. > > JT (off to build a release...) > > "Jeff Tyler says:" >> Hokay... Gotta flash my Verdex off of 1410. Two followup questions; >> >> 1. Ultimate goal is to get my netwifimicroSD-vx card working, any >> special preferred rev or just go with the latest on the gumstix >> download area? >> >> 2. The wiki is full of scary warnings about how TeraTerm will devour >> your first born, etc. Do these cautions apply to the Kermit found >> in Hyperterm as well or can I safely use that? (For a verity or >> reasons I have no open serial ports on any of my *ix boxes). >> >> 3. Any reason to replace u-boot ? >> >> [U-Boot 1.2.0 (May 16 2007 - 11:17:32) - PXA270@400 MHz - 1407] >> >> I don't need network support in u-boot. I just want my >> netwifimicroSD-vx or my netcf-vx [depending on which one is installed] >> to work during >> runtime. >> >> Ok, three questions, sorry! >> >> JT >> >> >> ------------------------------------------------------------------------- >> This SF.net email is sponsored by: Microsoft >> Defy all challenges. Microsoft(R) Visual Studio 2008. >> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> https://lists.sourceforge.net/lists/listinfo/gumstix-users >> > > |