From: Lou A. <gum...@gm...> - 2008-01-29 16:10:31
|
It looks like this was covered once before [ http://www.nabble.com/Audiostix2-LCD-Panel-Connection-td13118772.html#a13118772 ]. For archive purposes and for anyone else searching for audiostix2 + lcd or audiostix2 + samsung touchscreen lcd: Re: Audiostix2 LCD Panel Connection by Chris Dollar Oct 09, 2007; 10:53pm Chris Dollar wrote: > > The only way to use the Samsung lcd with an audiostix2 would be to > also have a custom board that would accept the fpc from the Samsung > display and take that out to headers/connectors that you can then > connect back on the audiostix2. You'd also have to figure out the > circuitry for the backlight, etc, since the audiostix2 board doesn't > have that support. You'd find it a lot easier with the consolelcd-vx. > ----------------------------------------------------------------------------- Lou Andrews wrote: > > Looking over the audiostix2 product page ( > http://gumstix.com/store/catalog/product_info.php?products_id=158) one of > the features is "LCD capability." > It also states that "Note: LCD signals expansion boards are LCD capable > after do-it-yourself soldering and wiring." > > Unfortunately, the wiki documentation ( > http://docwiki.gumstix.org/Frequently_asked_questions/GPSstix_and_Audiostix2) > is rather sparse regarding this. > > If one were to use the Samsung 4.3" touchscreen LCD panel from the gumstix > store ( > http://gumstix.com/store/catalog/product_info.php?cPath=28&products_id=195) > what pins or connections need to be soldered? > Is there any documentation for this? > > How would one configure it to function as a display for a verdex XM4-bt + > audiostix2 + netwifimicroSD combination? > > -- View this message in context: http://www.nabble.com/audiostix2-lcd-capability-tp15128458p15162691.html Sent from the Gumstix mailing list archive at Nabble.com. |