From: Brad M. <bmi...@gm...> - 2007-12-18 03:00:29
|
Matt On Dec 17, 2007 2:11 PM, Matt Wagenknecht <ma...@lh...> wrote: > I added HCIATTACH_START_SPEED=115200 to /etc/init.d/S30bluetooth and restart > the service.. still the same situation.. did you make the other changes already? This is in oe but maybe not yet in the buildroot. echo -n "Starting 32kHz clock..." echo AF1 out >/proc/gpio/GPIO12 echo GPIO out clear >/proc/gpio/GPIO7 sleep 1 echo GPIO out set >/proc/gpio/GPIO7 sleep 1 #/usr/sbin/pxaregs OSCC_OON 1 #while /usr/sbin/pxaregs OSCC_OOK | tail -n 1 | grep -q -v 1;do # echo -n '.' # sleep 1 #done echo "Settled" > > Something i noticed though, the service complains that the chipset is "not a > PBA31307". i know it is. it says so on the metal shield. :) can someone > post their dmesg for a connex 400Mhz? specifically, the > > > Got: status=0x00, hci_ver=0x01, hci_rev=0x0750, lmp_ver=0x02, manuf=0x0009, > lmp_subver=0x0750 that part matches what I get... Starting Bluetooth subsystem:Trying baud rate 115200... Got response after reset... gobbling Detected bluetooth module at 115200 baud Got: status=0x00, hci_ver=0x01, hci_rev=0x0750, lmp_ver=0x02, manuf=0x0009, lmp_subver=0x0750 Can't yet change speed for PBA31307 module. Will stay at 115200 baud -- Brad |