From: Marq R. <mar...@ya...> - 2007-11-06 19:14:44
|
Dave I cant thank you enough for your help. Marq Dave Hylands wrote: > > Hi Marq, > >> I am planning on using the i2c bus for a few other sensors we plan on >> implementing down the line. I am not currently using the FFUART pins for >> anything now so that is why I was considering using it instead of the >> STUART. Are there problems using the FFUART for serial input? I >> communicate >> with the gumstix via my netMMC stix, will using the FFUART for serial >> cause >> problems with the console? Also what is a logic-level serial interface? >> The >> IMU says that is comes setup to communicate via RS-232. > > You should read up on serial voltages & adapters: > <http://docswiki.gumstix.com/Serial_voltages> > <http://docswiki.gumstix.com/Serial_adapters> > >> If I do use the FFUART for serial do I need to do anything special to >> make >> it work? > > All of the console output goes to FFUART. Also, the u-boot output goes > there as well. > > This page covers the details: > <http://docswiki.gumstix.com/Tips_and_tricks#Free_ttyS0> > > If you make u-boot silent, and something happens that you can't get in > through the network, then you'll have effectively bricked your > gumstix. > >> Are there some good example you recommend for reading up on how to read >> from >> stdin? I was looking over serial log program and couldn't tell how it was >> doing this. > > sertest.c reads from stdin. > http://docswiki.gumstix.com/Sample_code/C/Serial > > -- > Dave Hylands > Vancouver, BC, Canada > http://www.DaveHylands.com/ > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. > Still grepping through log files to find problems? Stop. > Now Search log events and configuration files using AJAX and a browser. > Download your FREE copy of Splunk now >> http://get.splunk.com/ > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > -- View this message in context: http://www.nabble.com/Questions-about-robostix-gumstix-serial-connection-tf4754505.html#a13613689 Sent from the Gumstix mailing list archive at Nabble.com. |