Re: [Gumstix-users] Problems running Simple servo

[Marq R. <mar...@ya...>]

Thanks for your help Dave.

I have not noticed any difference in operation between the precomiled simple
servo and the one I compile so it is probably not a big deal.

Marq


Dave Hylands wrote:
> 
> Hi Marq,
> 
>> When I run the pre-compiled flash led program it does not run at half
>> speed,
>> and get a serial connection of 38400.
>>
>> When I run the pre-compiled simple servo I get a serial connection speed
>> of
>> 38400 and the led flashes at the full rate.
>>
>> When I run the Simple servo program unmodified that I compiled I get the
>> serial connection speed of 38400 and the led flashes at half rate. Same
>> goes
>> for the modified code.
> 
> Interesting. The fact that the serial is still working at 38400 tells
> me that the CPU is running at the right frequency.
> 
> I suspect that the LED toggling at half rate is just due to some
> timing thing I haven't considered.
> 
> -- 
> Dave Hylands
> Vancouver, BC, Canada
> http://www.DaveHylands.com/
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems?  Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >> http://get.splunk.com/
> _______________________________________________
> gumstix-users mailing list
> gum...@li...
> https://lists.sourceforge.net/lists/listinfo/gumstix-users
> 
> 

-- 
View this message in context: http://www.nabble.com/Problems-running-Simple-servo-tf4604210.html#a13224720
Sent from the Gumstix mailing list archive at Nabble.com.