From: Chris D. <chr...@gm...> - 2007-10-15 15:40:50
|
Hi Marc, All that was committed to my user branch in svn - not the main gumstix trunk. To checkout my branch the command would be: svn co http://svn.gumstix.com/gumstix-buildroot/branches/users/cdollar/trunk chris-buildroot The build still has a number of issues with dependencies, and there are a few patches that I need to commit to it as well, but I'd say it is 90% working. I'm not really maintaining that branch anymore as I've switched to using openembedded for building kernel/rootfs instead of the gumstix buildroot. If you are serious about graphical programming with the gumstix I'd encourage you to check out oe (openembedded.org). It has MUCH better support for X, gtk+, etc, and for me it builds out-of-the-box. That being said, the learning curve for oe is fairly steep, so if you want to try it with my buildroot branch give it a go. I know of one person with a verdex who used my branch last week to get X and matchbox working on a verdex (no touchscreen support though - I'm not sure that there is a working driver for the i2c based ts controller on the consolelcd-vx just yet. Good luck! Chris On 10/15/07, Marc Humphreys <mhu...@lo...> wrote: > Chris, > > I searched the archive but couldn't see any follow up to your efforts of > committing the x11r7 + gtk2 + matchbox stuff. Any update? I'm using a verdex > XL6P and was interested to know if you or anyone else has a solution there > yet? Maybe you've since taken another direction for WM support - I'd be > interested in knowing if so and recommendation on a suitable WM prefereably > with working touch screen support? > > Thanks, > > Marc > > -----Original Message----- > From: gum...@li... > [mailto:gum...@li...] On Behalf Of Chris > Dollar > Sent: Tuesday, July 10, 2007 1:37 PM > To: General mailing list for gumstix users. > Subject: Re: [Gumstix-users] Trouble building X windows for Gumstix > > Hi Robert, > > I have x11r7 + gtk2 + matchbox and supporting packages running on my > connex-xm. Everything works fine for me, but I have some problems > with my buildroot makefiles that cause a number of the targets to get > re-run with each 'make' of the buildroot. I've not seen any ill > effects of having the targets rebuilt each time, but I know it really > shouldn't happen if the makefile is written correctly. So long story > short I'm still trying to work the gremlins out of my makefiles before > they'll work correctly with the gumstix buildroot. > > I do have a root filesystem image that includes X, matchbox, gtk2, etc > that I could get to you if you wanted to give it a shot (but it will > only fit/work on a connex-xm). > > Chris > > On 7/9/07, ro...@in... <ro...@in...> wrote: > > Hello, > > > > I want to compile X windows for the Gumstix but I am running > > into errors after I enable X windows and then run make. > > > > I am working with r1089 Gumstix buildroot. > > > > I get a lot of errors about missing header files > > (specifically stddef.h and stdargs.h, maybe others), > > an error message about "Unsupported size of `int' type!", > > an error message about "Unsupported size of `long' type!", > > and finally "[depend] Floating point exception". > > > > Any advice is welcome. Also if anyone has successfully > > rebuilt X windows for the Gumstix I would interested > > to hear about it. > > > > regards, > > Robert Dodier > > > > ------------------------------------------------------------------------- > > This SF.net email is sponsored by DB2 Express > > Download DB2 Express C - the FREE version of DB2 express and take > > control of your XML. No limits. Just data. Click to get it now. > > http://sourceforge.net/powerbar/db2/ > > _______________________________________________ > > gumstix-users mailing list > > gum...@li... > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. > Still grepping through log files to find problems? Stop. > Now Search log events and configuration files using AJAX and a browser. > Download your FREE copy of Splunk now >> http://get.splunk.com/ > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > |