From: Goodell, L. <leo...@in...> - 2007-08-02 21:47:48
|
That worked!! Thanks for the help!! =20 -Lenny =20 ________________________________ From: gum...@li... [mailto:gum...@li...] On Behalf Of Joshua Hintze Sent: Thursday, August 02, 2007 3:00 PM To: 'General mailing list for gumstix users.' Subject: Re: [Gumstix-users] Console VX /dev/ttyS1 not working =20 Were using the BT UART in our project. I'm not sure if you have to but I removed the blue tooth startup script in =20 /etc/init.d/S90bluetooth.sh (or whatever its called I don't have it in front of me.) =20 Note however that the S90bluetooth.sh modeprobes the proc_gpio so you will need to do that yourself. Just modify =20 /etc/modules and added proc_gpio =20 Josh =20 ________________________________ From: gum...@li... [mailto:gum...@li...] On Behalf Of Goodell, Leonard Sent: Thursday, August 02, 2007 2:49 PM To: General mailing list for gumstix users. Subject: [Gumstix-users] Console VX /dev/ttyS1 not working =20 I am not able to get the /dev/ttyS1 port on the Console VX to work. This is the BTUART according to http://docswiki.gumstix.com/Console-vx#Logic_Level_Serial =20 I am using the sertest sample program and a simple Window app I wrote to read/write to/from the serial ports. /dev/ttyS2 (STUART) works fine with these test programs. =20 I have also been successful testing /tty/USB0 when I plug in my USB serial adapter to the Gumstix. =20 What am I missing to get /dev/ttyS1 (BTUART) to work? =20 I noticed on reboots that Blue tooth attempts to start-up, but fails since I don't have BT. Is this conflicting with the BTUART? Do I need to reconfig the kernel to remove BT? =20 Thanks! Lenny |