From: Craig H. <cr...@gu...> - 2007-07-25 19:45:55
|
On Jul 25, 2007, at 9:32 AM, Peter Lu wrote: > It looks like my set-up simply puts uImage at 40000 and rootfs at > 140000, so the > instructions I needed were: > > protect on 1:0-1 && erase all > tftp a2000000 uImage > cp.b a2000000 40000 ${filesize} > tftp a2000000 rootfs.arm_nofpu.jffs2 > cp.b a2000000 140000 ${filesize} That's basically what the new katinstall/katload stuff does (I imagine this was done by someone before that came along) -- I'd recommend switching to using the katinstall/katload system, with the uImage at the top of flash instead of the low end of flash, and JFFS2 in the middle of flash. I forget why I decided to do it that way rather than the way you've got it now, but I had a reason... Anyway though, if you do switch to doing it the katinstall/katload way, then you can dump a lot of your complexity and just use the same system a lot of other gumstix users do too now. C |