Re: [Gumstix-users] Robostix cf bundle

[Dave H. <dhy...@gm...>]

Hi Joe,

> Sorry the TWEENER and the connex work together with the robo after
> modification. The cf board gets power because the led is on. As soon as the
> cf is connected the assembly will not boot. Any ideas out there? Maybe just
> a bad cf or 92pin connector on one of the boards...

Yeah - it sounds like the cf board is bad. it could also be the
motherboard (but if you only have one motherboard and one CF card it's
hard to tell).

When this has happened in the past, its typically been the CF card that's bad.

-- 
Dave Hylands
Vancouver, BC, Canada
http://www.DaveHylands.com/