Re: [Gumstix-users] wifistix and buildroot release 1457 problem Jason Peterson

[Jason P. <ja...@wi...>]

Lee Janes wrote:
> Jason,
>
> I ran into this yesterday as well. I assumed that something was build and executed
>
> # rm rootfs.arm_nofpu.jffs2
> # rm uImage
> # rm toolchain_build_arm_nofpu/gcc-*-final/.configured
> # make
>
> Not sure if it will work for you. I still have to add the extra character to the ESSID though.
>
> -Lee
>
> -----Original Message-----
> From: gum...@li... [mailto:gum...@li...] On Behalf Of Jason Peterson
> Sent: Monday, July 16, 2007 2:16 PM
> To: gum...@li...
> Subject: [Gumstix-users] wifistix and buildroot release 1457 problem Jason Peterson
>
> Hi All,
>
> I just downloaded the latest buildroot in order to use wifistix without 
> the essid truncation problem with kernel 2.6.20.
>
> I have a 200Mhz connex with a wifistix and tweener.
>
> During boot I get the following:
>
> Starting network...
> udhcpc (v0.9.9-pre) started
> Dec 31 16:17:15 udhcpc[179]: udhcpc (v0.9.9-pre) started
> m
> Dec 31 16:17:15 udhcpc[179]: [truncated] m
> cfio: module license 'unspecified' taints kernel.
> cfio: Unknown symbol pcmcia_disable_device
> cfio: Unknown symbol pcmcia_unregister_driver
> cfio: Unknown symbol pccard_get_first_tuple
> cfio: Unknown symbol pcmcia_get_configuration_info
> cfio: Unknown symbol pcmcia_request_io
> cfio: Unknown symbol pcmcia_request_configuration
> cfio: Unknown symbol pcmcia_access_configuration_register
> cfio: Unknown symbol pccard_get_tuple_data
> cfio: Unknown symbol pcmcia_register_driver
> cfio: Unknown symbol pccard_parse_tuple
> cfio: Unknown symbol pcmcia_request_irq
> Dec 31 16:17:15 modprobe: WARNING: Error inserting cfio 
> (/lib/modules/2.6.21gum/extra/cfio.ko): Unknown symbol in module, or 
> unknown parameter (see dmesg)
>
> mcf25: Unknown symbol cfio_read_cfg_reg
> mcf25: Unknown symbol pccard_get_first_tuple
> mcf25: Unknown symbol cardp
> mcf25: Unknown symbol cfio_dev_info
> mcf25: Unknown symbol pccard_get_tuple_data
> mcf25: Unknown symbol register_cf_driver
> mcf25: Unknown symbol pccard_get_next_tuple
> mcf25: Unknown symbol unregister_cf_driver
> Dec 31 16:17:15 modprobe: FATAL: Error inserting mcf25 
> (/lib/modules/2.6.21gum/extra/mcf25.ko): Unknown symbol in module, or 
> unknown parameter (see dmesg)
>
> Error for wireless request "Set ESSID" (8B1A) :
>     SET failed on device mwlan0 ; No such device.
>
>
> Any Ideas,
>
> Thanks,
>
> Jason Peterson
>
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> gumstix-users mailing list
> gum...@li...
> https://lists.sourceforge.net/lists/listinfo/gumstix-users
>
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> gumstix-users mailing list
> gum...@li...
> https://lists.sourceforge.net/lists/listinfo/gumstix-users
>
>   
Hi Lee,

What do you mean "I assumed that something was build and executed" ?

I tried removing the files you mentioned and make, but now I get a build 
error for gcc...

Jason