From: Sibilsky <bsi...@co...> - 2007-06-08 13:05:53
|
Thanks Craig that helped! I now have the Ethernet interface up and running. Couple comments though: 1. Still can't get the compact flash to mount. 2. Before you sent this email last night I went ahead and started a fresh download into a new directory. I then did a fresh build. It went through fine but it didn't generate a uImage file?? I just thought that was weird. (however when I did what you described below, I did get an updated uImage file in the old updated 1424 directory structure) Brian Sibilsky -----Original Message----- From: gum...@li... [mailto:gum...@li...] On Behalf Of Craig Hughes Sent: Thursday, June 07, 2007 11:26 PM To: General mailing list for gumstix users. Subject: Re: [Gumstix-users] eth0: link down in Verdex Linux,but not in U-Boot On Jun 7, 2007, at 7:27 PM, Sibilsky wrote: > Craig, just to confirm, all I need to do is run an SVN update and > then run > make? My first try doesn't seem to work, but I'll keep playing with > it. > > I do get "DISTRIB_RELEASE='1425' when I type out the 'gumstix- > release' file. svn update;rm -rf build_arm_nofpu/linux*;make should do the trick. You need to remove the old linux directory before re-making C ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ gumstix-users mailing list gum...@li... https://lists.sourceforge.net/lists/listinfo/gumstix-users |