From: Sibilsky <bsi...@co...> - 2007-06-08 02:27:03
|
Craig, just to confirm, all I need to do is run an SVN update and then = run make? My first try doesn't seem to work, but I'll keep playing with it. I do get "DISTRIB_RELEASE=3D'1425' when I type out the 'gumstix-release' = file. Brian -----Original Message----- From: gum...@li... [mailto:gum...@li...] On Behalf Of Craig Hughes Sent: Thursday, June 07, 2007 8:29 PM To: General mailing list for gumstix users. Subject: Re: [Gumstix-users] eth0: link down in Verdex Linux,but not in U-Boot Ok, just committed code which lets both pcmcia and ethernet work. =20 verdex branch r1425 C On Jun 7, 2007, at 10:18 AM, bsi...@co... wrote: > Craig, thanks for the update. Is the new version posted yet, if not =20 > any estimate as to when it will be posted. ... just trying to =20 > decide whether or not to revert back to the older version. > > Brian Sibilsky > > = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > > Re: eth0: link down in Verdex Linux, but not in U-Boot =20 > document.write(Nabble.ratingStars(3)); > > by document.write('<a href=3D\"' +'/user/UserProfile' + =20 > '.jtp?'+'user=3D483362\" rel=3D\"nofollow\" target=3D\"_top\">'); = Craig =20 > Hughes document.write('</a>'); document.write(Nabble.formatDateLong=20 > (new Date(1181177116000))); Jun 06, 2007; 07:45pm :: Rate this =20 > Message: (use ratings to moderate[?]) > > document.writeln('<a href=3D"/forum/Reply.jtp?post=3D11000061" =20 > rel=3D"nofollow" target=3D"_top">Reply</a> | '); Reply | Reply to =20 > Author if( Nabble.user =3D=3D 483362 ) { document.writeln('| <a =20 > href=3D"javascript:Nabble.deletePost=20 > (11000061,Nabble.confirmDeletePostQuestionMailingList);" =20 > rel=3D"nofollow">Delete</a>'); } | Show Only this Message > > I found the source of the problem -- I mis-merged some patches while > trying to get ready to merge the verdex branch back onto the trunk > (with r1343) -- I'm in the process of trying to fix the merge now; > ETA tonight sometime. In the meantime, you can revert to r1342 to > get a working ethernet and CF -- there might be other broken bits > too; the mis-merge was in the main gumstix header file in asm-arm/ > arch-pxa/gumstix.h which defines all the gumstix GPIOs for the boards > we sell. The current version in the HEAD of the verdex branch > actually has the basix/connex definitions instead of the verdex ones. > > C > > On Jun 6, 2007, at 5:02 PM, Sibilsky wrote: > > > For what its worth I seem to have the same problem with eth0 link > > down after > > rebuilding the kernel with version 1424. (verdex xlp6) > > > > I also can't mount the CF card, but I'm not sure if that's related. > > (CF > > cards works in U-boot though) > > > > Brian Sibilsky > > > > -----Original Message----- > > From: gumstix-users-bounces@... > > [mailto:gumstix-users-bounces@...] On Behalf Of > > Craig > > Hughes > > Sent: Wednesday, June 06, 2007 4:53 PM > > To: General mailing list for gumstix users. > > Subject: Re: [Gumstix-users] eth0: link down in Verdex Linux,but > > not in > > U-Boot > > > > On Jun 6, 2007, at 2:15 PM, Gert Jim Muller wrote: > > > >> I rebuilt the kernel to add framebuffer support and now the eth0 > >> does not come alive any more. > >> ; > >> The network device works perfectly with U-boot 1.2.0's tftp and the > >> lights are even starting to flash upon an "ifup", but the link > >> stays down and ping and ssh does not work. > >> > >> Any help would be appreciated. > > > > I just noticed the same thing while doing some testing here. I'm > > working on it as I type. > > > > C > > > > > > =20 > ---------------------------------------------------------------------- > > --- > > This SF.net email is sponsored by DB2 Express > > Download DB2 Express C - the FREE version of DB2 express and take > > control of your XML. No limits. Just data. Click to get it now. > > http://sourceforge.net/powerbar/db2/ > > _______________________________________________ > > gumstix-users mailing list > > gumstix-users@... > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > > > =20 > ---------------------------------------------------------------------- > > --- > > This SF.net email is sponsored by DB2 Express > > Download DB2 Express C - the FREE version of DB2 express and take > > control of your XML. No limits. Just data. Click to get it now. > > http://sourceforge.net/powerbar/db2/ > > _______________________________________________ > > gumstix-users mailing list > > gumstix-users@... > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > ---------------------------------------------------------------------- = > --- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > gumstix-users mailing list > gumstix-users@... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > <!-- if( Nabble.ads ) { Nabble.ads(); } //--> > ---------------------------------------------------------------------- = > --- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/=20 > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users -------------------------------------------------------------------------= This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ gumstix-users mailing list gum...@li... https://lists.sourceforge.net/lists/listinfo/gumstix-users |