From: Rohit C. <roh...@gm...> - 2007-03-27 06:49:52
|
Hi, I need to connect a sensor to the gumstix breakout-gs via I2C. For this I need to figure out how much current will be output to the sensor on the I2C lines (the sensor needs 0.6-0.8 mA at 3.3V). Can someone please tell me how much current is supplied on the breakout-gs I2C pins? The sensor has pullup resistors on the SDA and SCL lines, so additional pullup resistors are not required for connecting to the breakout-gs. thanks, Rohit |