From: Jesse W. <jes...@gm...> - 2006-11-14 06:26:24
|
Thanks for the reply Dave, Yea, I was thinking of doubling up those 3.6 ones but.....I'm not quite sure how. But I'm prety sure I need to hook up two because a 7.2 lipoly is actualy two 3.6 cells. Bottom line is my ESC has lipoly cut off for however many cells I tell it. So as long as I charge them both and only use them untill the ESC cuts out I won't over discharge the one supplying the gumstix because the gumstix should draw <500 mA where as my motor and two servos should draw at least 1.5 amps (guessing here but one servo is a scanning servo which is constantly moving). Thanks for the Help. On 11/13/06, Dave Hylands <dhy...@gm...> wrote: > > Hi Jesse, > > On 11/13/06, Jesse Welling <jes...@gm...> wrote: > > So I'm trying to use 7.2 lipolys to power my robostix/gumstix > > 400xm-bt/netmmc stack (the ethernet will be powered down) > > I'm wondering if this: > > http://www.dimensionengineering.com/DE-SW0XX.htm will be > > sufficient to step down my power to 5v so > > I can avoid thermal problems with the onboard voltage regulator. The > > question Is will this be adequate to use or is there something I'm > missing? > > Thanks for the help! > > It says that it has a 1.3v dropout voltage, so this means that it need > 6.3v to operate. Since LiPolys should never be allowed to go below 3v, > that seems like a pretty reasonable fit. > > I highly recommend using a protection circuit which cuts out the > battery if the voltage goes too low. Something one of these: > <http://www.all-battery.com/index.asp?PageAction=VIEWCATS&Category=178> > > -- > Dave Hylands > Vancouver, BC, Canada > http://www.DaveHylands.com/ > > ------------------------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job > easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > -- -Jesse W. |