From: Michal 'L. Z. <la...@fa...> - 2006-11-13 21:29:57
|
Hi Dave... About the voltages... Just after plugin in to the power.. voltages (VCC5) looked ok, and I also had 5V on AVCC and 5V on V_BATT and about 3V on VCC (right red dot). But just after this.. I started to checking 1.0uF on the left of the PCB (this red dot).. and first thing I noticed was that you have horizontal capacitors and I have vertical... and.. there was no voltage.. completely! Than I checked again the VCC5 line, that had voltage before and it disappeared! And was 0V there... It looks very strange... So I cannot provide you the fully consistent results. Any other ideas? It looks like after some (short) time, the voltage on VCC5 becomes 0V, and in some other places too. -----Original Message----- From: gum...@li... [mailto:gum...@li...] On Behalf Of Dave Hylands Sent: Monday, November 13, 2006 9:55 PM To: General mailing list for gumstix users. Subject: Re: [Gumstix-users] uisp problem Hi Michal, > If it doesn't reset the second time, try commenting out the lines in > the script that manipulate gpio70 & 72 and try again. You missed this step. Obviously, the fact that the voltage regulators aren't working is related to the problem, but I don't think that its the whole problem. -- Dave Hylands Vancouver, BC, Canada http://www.DaveHylands.com/ ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ gumstix-users mailing list gum...@li... https://lists.sourceforge.net/lists/listinfo/gumstix-users |