Re: [Gumstix-users] Basic bootargs command question.

[David S. <dav...@ho...>]

Hi all,
 
I'm trying to configure an LCD with the gumstix following the steps in the
wiki display. to set the bootargs I'm using a line like this:
 
GUM> setenv bootargs console=ttyS0,115200n8 root=1f01 rootfstype=jffs2
reboot=cold,hard video=pxafb:mode:640x480-16,active
,hsynclen:7,right:16,left:5,upper:19,lower:19,vsynclen:2,hsync:1,vsync:1,pix
clockpol:0,pixclock:216363
 
The line is too long for one line and the second line is not recognized.
after rebooting I get errors or all my registers are set to zero (that's
depending what I have in the fist line and what in the next one). I'd been
trying different ways to do it but is not working. 
 
What is the correct way to set the bootargs using several lines?
 
 Thanks,
 
David