Re: [Gumstix-users] LiIon/LiPoly

[<tim...@co...>]

Brad said:
> isn't this 3.3v output right at the bottom of the usable range for
> gumstix?

Right, the resistor values for R1, R2 would need to be changed.

(page 6 of data sheet)
FB (Pin 9): Feedback Pin. Connect resistor divider tap
here. The output voltage can be adjusted from 2.5V to
5.5V. The feedback reference voltage is typically 1.22V.

We can ask the Apps Eng for the correct values.
I ordered some samples

Tim