From: Jesse W. <jda...@ho...> - 2006-08-10 00:29:29
|
You could also use a I2C ADC such as the Max128 or the ADS7828, in which case you just need a breakout board that brings the I2C... Did you need the Robostix specificaly for dirving servos and such? -Jesse W. >From: "Ben Ford" <be...@fo...> >Reply-To: "General mailing list for gumstix users." ><gum...@li...> >To: "General mailing list for gumstix users." ><gum...@li...> >Subject: Re: [Gumstix-users] Basic description of using gum+robostix >for ADC? >Date: Wed, 09 Aug 2006 23:24:14 +0100 > >Thanks very much, are the ADCs on the audio stix capable of a more simple >operation? I would be hoping to produce a lot of systems, so it would be >very awkward to program controllers and then also run the software on the >gumstix. >Thanks, >Ben > >-----Original Message----- >From: "Jesse Welling" <jda...@ho...> >To: gum...@li... >Date: Wed, 09 Aug 2006 21:29:41 +0000 >Subject: Re: [Gumstix-users] Basic description of using gum+robostix for >ADC? > > > > > not that it's a ready made solution (not in the least!) > > but you could look at the Procyon AVRlib is a pretty good base to work > > from > > if i2c-io doesn't quite meet your needs. > > http://hubbard.engr.scu.edu/avr/avrlib/docs/html/index.html > > > > > > -Jesse W. > > > > > > > > > > >From: "Dave Hylands" <dhy...@gm...> > > >Reply-To: "General mailing list for gumstix users." > > ><gum...@li...> > > >To: "General mailing list for gumstix users." > > ><gum...@li...> > > >Subject: Re: [Gumstix-users] Basic description of using gum+robostix > > for > > >ADC? > > >Date: Wed, 9 Aug 2006 13:45:41 -0700 > > > > > >Hi Ben, > > > > > >On 8/9/06, Ben Ford <be...@fo...> wrote: > > > > Hello, > > > > I have been reading about all over the place and still can't get my > > head > > > > around exactly how to go about this. > > > > I have a gumstix platform with a robostix. > > > > Can i access the ADC and IOs from the robostix directly from linux > > >within > > > > the gumstix? Or is there a way to do this with a different setup of > > >"stix"? > > > > The main things i would like/need to be able to do is have a serial > > LCD > > > > and GPRS modem running, and a number of ADCs available (probably 4) > > > > I am not bothered about the actual system used, whether i have > > wasted > > > > money on a robostix doesnt matter. I suppose i should have enquired > > >first! > > > > Or is my understanding that the robostix is a seperate > > microcontroller > > > > that must have code written for it? > > > > > >The robostix is a separate microcontroller that must have code written > > >for it, however there is already a bunch of code available. > > > > > >The i2c-io program will allo the ADCs to be read and the GPIOs to be > > >manipulated. > > > > > >You can find out more, by looking at these pages: > > >http://docswiki.gumstix.org/Robostix_i2c_bootloader > > >http://docswiki.gumstix.org/Robostix_i2c_load > > >http://docswiki.gumstix.org/Robostix_i2c_io > > > > > >i2c-io doesn't currently have an serial port support, although for > > >output only, you could do direct register manipulation using i2c-io. > > > > > >-- > > >Dave Hylands > > >Vancouver, BC, Canada > > >http://www.DaveHylands.com/ > > > > > >---------------------------------------------------------------------- > > --- > > >Using Tomcat but need to do more? Need to support web services, > > security? > > >Get stuff done quickly with pre-integrated technology to make your job > > >easier > > >Download IBM WebSphere Application Server v.1.0.1 based on Apache > > Geronimo > > >http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=1216 > > 42 > > >_______________________________________________ > > >gumstix-users mailing list > > >gum...@li... > > >https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > > > > > ----------------------------------------------------------------------- > > -- > > Using Tomcat but need to do more? Need to support web services, > > security? > > Get stuff done quickly with pre-integrated technology to make your job > > easier > > Download IBM WebSphere Application Server v.1.0.1 based on Apache > > Geronimo > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=12164 > > 2 > > _______________________________________________ > > gumstix-users mailing list > > gum...@li... > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > >------------------------------------------------------------------------- >Using Tomcat but need to do more? Need to support web services, security? >Get stuff done quickly with pre-integrated technology to make your job >easier >Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo >http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >_______________________________________________ >gumstix-users mailing list >gum...@li... >https://lists.sourceforge.net/lists/listinfo/gumstix-users |