From: Athanasios A. <ath...@pl...> - 2006-08-08 14:41:56
|
Hello Rajagopalan. To "boot linux on the gumstix" you do not need to connect through the serial port. Once you power up the board, it will boot normally. If you want to access a console login you will need access to the serial port. You can either do this via the hirose connector, or simply by purchasing one of the HWUART expansion boards. This also provides a USB connection, as well as a power supply jack Hope this helps Best Regards. Athanasios Anastasiou |