Re: [Gumstix-users] audiostix2 documentation?

[Dave H. <dhy...@gm...>]

Hi Laker,

On 6/28/06, Laker Netman <lak...@ya...> wrote:
> Okay, so something like this should do the trick for
> interfacing:
> http://www.superdroidrobots.com/shop/item.asp?itemid=335

Youch - yeah - a bit on the pricey side.

Something like this is quite a bit cheaper:
http://www.pololu.com/products/pololu/0126/

There are a few USB ones available too, see:
http://www.gumstix.org/tikiwiki/tiki-index.php?page=RoboStix-Serial

> Then, will the molex header they advertise here:
> http://www.superdroidrobots.com/shop/item.asp?itemid=560
> have the proper pin spacing to drop in for soldering
> on the through holes provided by the audiostix?

I suspect that those are 0.1", and not 0.05"

If you're just looking for a few 3 & 4 pin connectors, you can get these:
http://www.junun.org/MarkIII/Info.jsp?item=55
http://www.junun.org/MarkIII/Info.jsp?item=56

There are also some from DigiKey:
http://dkc3.digikey.com/PDF/T062/0337.pdf

Fig 26 thru 33 are 0.050" spaced, but a tad on the pricey side.

Mouser also has them for cheaper:
http://www.mouser.com/catalog/626/1075.pdf

-- 
Dave Hylands
Vancouver, BC, Canada
http://www.DaveHylands.com/