[Gumstix-users] binary operator expected

[Travis C. <Travis@DreamingWell.com>]

Howdy,

I made a root_fs from build-root revision 1003 (latest as of last  
night), and loaded on my gumstix.

Now when the startup scripts  (and almost any shell script I think)   
are run I receive an error like:

[: /script/name/here: binary operator expected

I verified that the scripts (such as dropbear startup) arn't running.

Tried a re-build and and re-downloaded from svn.

Any Thoughts?

Here some output of boot up:

usb0: RNDIS ready
[: deconfig: binary operator expected
[: : binary operator expected
[: : binary operator expected
NET: Registered protocol family 17
[: leasefail: binary operator expected
[: : binary operator expected
[: : binary operator expected
udhcpc (v0.9.9-pre) started
Dec 31 16:27:25 udhcpc[210]: udhcpc (v0.9.9-pre) started
smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <ni...@ca...>
eth0: SMC91C11xFD (rev 1) at c4854300 IRQ 59 DMA 9 [nowait]
eth0: Ethernet addr: 06:00:a8:41:cb:d1
smc91x: not found (-19).
[: deconfig: binary operator expected
[: : binary operator expected
[: : binary operator expected
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[: bound: binary operator expected
[: 255.255.255.255: binary operator expected
[: 255.255.255.0: binary operator expected
[: 10.0.1.1: binary operator expected
[: : binary operator expected
adding dns 10.0.1.1
[: /etc/init.d/S50bonjour: binary operator expected
[: /etc/init.d/S50dropbear: binary operator expected
[: /etc/dropbear: binary operator expected
[: /usr/bin/dropbearkey: binary operator expected
[: /etc/init.d/S50httpd: binary operator expected
Starting httpd...
gethostbyname:: Success