From: David V. <dav...@ta...> - 2006-03-25 00:06:32
|
Still would like to see a LCD bias generator on board. Better yet a MAX3325 http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2117 RS-232 and LCD bias! DV ----- Original Message -----=20 From: David Vescovi=20 To: Gumstix Users mailing list=20 Sent: Friday, March 24, 2006 10:51 AM Subject: RE: [Gumstix-users] A new site from us AUDIOSTIX II feedback AUDIOSTIX II feedback The extra I/O pins and A/D channels from the UCB1400 should be brought = to connector or at least to pads/vias so we can solder to them. DV -----Original Message----- From: gum...@li... = [mailto:gum...@li...] On Behalf Of Pascal = A. Brisset Sent: Thursday, March 23, 2006 9:46 PM To: gum...@li... Subject: Re: [Gumstix-users] A new site from us Gordon Kruberg writes: > Those of you with time let us know what you think about > = http://pubs.gumstix.com/boards/AUDIOSTIX/PCB00012-R775/ (audiostix II) - How about moving the connector labels on the silkscreen so that they are still visible after the board is populated ? Printing "audio in" and "audio out" somewhere would be even better. - It would be nice to have an optional null resistor or jumper between USB_VBUS and V_BATT, unless there is a good reason to never connect them (?). - Similarly, how about an optional jumper between V_BATT and AD0 ? (The UCB400 has internal resistive voltage dividers on ADx.) -- Pascal |