Re: [Gumstix-users] Problem with Ambicom/Global Wireless WL1100C-CFC WiFi Card

[Michael T. <mik...@ap...>]

The card is detected as Z-Com XI300 11Mb/s WLAN Card.  This is 
apparently OK from what I have read.  I've seen three modes:

1.  Fails with "prism2_enable_ax_port: was not enabled!?"

2.  Registered netdevice wifi0 with index 0x01: Vcc 5.0, irq 49, io 
0xc4860000-0xc486003f
but locking up after
wifi0: NIC: id=0x801b v1.0.0
wifi0: PRI: id=0x15 v1.1.1
wifi0: STA: id=0x1f v1.8.0

and

3. Successful boot with netdevice wifi0 "registered".

The same configuration can produce all three cases, just rebooting.  I'm 
thinking race condition or some other problem with the initialization 
sequence.