From: Cyril B. <cyr...@gm...> - 2005-07-18 13:22:03
|
Hello, Now, there are tons of differents gumstix, daughter boards and for each=20 couple of gumstix/motherborad there are many possibles configurations... It could be interesting to configure the type of configuration you want to= =20 use before the buildroot compilation. For example: bluetooth or ttyS3, preconfigured ttyS2 or not, configuring=20 which of ttyS2 and ttyS3 is the second serial port, etc But, I think Craig is too busy for that, it's just a suggestion to improve= =20 the quality of the product in the future... Cyril On 7/17/05, Naveen Sastry <nk...@cs...> wrote: >=20 > yep. We were able to get the HWUART on the breakout-gs board. >=20 > If I remember correctly, all we had to do was: >=20 > a) run the flow control patch (r-516). > b) set the appropriate GPIO pins to use the HWUART; by default they're > not setup for it. I think: >=20 > echo "AF1 out" >/proc/gpio/GPIO48 > echo "AF1 in" >/proc/gpio/GPIO49 >=20 > will do it (from memory). There's a post by Cyril on the mailing list > that provided that useful tidbit. We tested it with wermit and were able > to conenct to another serial running a getty. >=20 > John Cole wrote: > > Has anyone gotten the HWUART on the breakout-gs to work yet? I have > > been trying for several days with no luck. I am currently running r-516 > > with the 201 no flow control kernel patch. Have tried every alternative > > I can think of, but no luck. I have verified that the data stream is > > running to the pins, but seems to not be being received by the driver. > > Any suggestions would be much appreciated > > > > John > > > > > > ------------------------------------------------------- > > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > > from IBM. Find simple to follow Roadmaps, straightforward articles, > > informative Webcasts and more! Get everything you need to get up to > > speed, fast. http://ads.osdn.com/?ad_id=3D7477&alloc_id=3D16492&op=3Dcl= ick > > _______________________________________________ > > gumstix-users mailing list > > gum...@li... > > https://lists.sourceforge.net/lists/listinfo/gumstix-users >=20 >=20 >=20 > ------------------------------------------------------- > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > from IBM. Find simple to follow Roadmaps, straightforward articles, > informative Webcasts and more! Get everything you need to get up to > speed, fast. http://ads.osdn.com/?ad_id=3D7477&alloc_id=3D16492&op=3Dclic= k > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > |