Re: [Gpsbabel-misc] Converting .gpx to NMEA

[Tom P. <tom...@gm...>]

I initially tried the same thing, and eventually discovered that if
you add the following track filter gpx-->nmea works without any
messing around:

gpsbabel -i gpx -f in.gpx -x track,fix=3d -o nmea -F out.log

hope that helps,

Tom

On Thu, Jan 22, 2009 at 8:43 AM, Eftihios <papaFX>
<eft...@ho...> wrote:
> Thanks for the hard work on GPSBabel.
>
> I have a small problem. I'm trying to convert .gpx files to NMEA for use in
> a mapping software.
> After some tests (changing the V to A and calculating the new checksum) I
> solved it.
> The convert goes smoothly but the RMC line has the Void [V] status instead
> of the Active [A] one
> For example I get this line
> $GPRMC,114610.000,V,3937.276,N,02225.132,E,47.51,0.00,200109,,*20
>
> instead of
> $GPRMC,114610.000,A,3937.276,N,02225.132,E,47.51,0.00,200109,,*37
>
> My software does not accept this and does not import any data...
> I cannot change this behaviour...
>
> My question is if there is a switch to do this in the export phase of
> GPSBabel.
>
> Thanks in advance
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by:
> SourcForge Community
> SourceForge wants to tell your story.
> http://p.sf.net/sfu/sf-spreadtheword
> _______________________________________________
> Gpsbabel-misc mailing list http://www.gpsbabel.org
> Gps...@li...
> To unsubscribe, change list options, or see archives, visit:
> https://lists.sourceforge.net/lists/listinfo/gpsbabel-misc
>
>