Re: [Gimp-print-devel] 4.3.21 not printing anything?!

[Robert L K. <rl...@al...>]

   From: Bernd Heller <bdh...@us...>
   Date: Fri, 26 Sep 2003 19:56:08 +0200

   Hello,

   we tried gimp-print 4.3.21 today and are having a severe problem with 
   it: it doesn't output any real print data. The printdata of all jobs 
   (for an EPSON 7600) looks somewhat like this:

   00000000  00 00 00 1b 01 40 45 4a  4c 20 31 32 38 34 2e 34  |.....@EJL 
   1284.4|
   00000010  0a 40 45 4a 4c 20 20 20  20 20 0a 1b 40 1b 40 1b  |.@EJL     
   ..@.@.|
   00000020  28 52 08 00 00 52 45 4d  4f 54 45 31 50 48 02 00  
   |(R...REMOTE1PH..|
   00000030  00 01 53 4e 03 00 00 05  1a 53 4e 03 00 00 04 6b  
   |..SN.....SN....k|
   00000040  50 50 03 00 00 02 00 1b  00 00 00 1b 28 47 01 00  
   |PP..........(G..|
   00000050  01 1b 28 55 05 00 04 04  04 40 0b 1b 28 4b 02 00  
   |..(U.....@..(K..|
   00000060  00 02 1b 28 69 01 00 00  1b 55 00 1b 28 65 02 00  
   |...(i....U..(e..|
   00000070  00 11 1b 28 44 04 00 40  38 28 14 1b 28 43 04 00  
   |...(D..@8(..(C..|
   00000080  f0 1e 00 00 1b 28 63 08  00 00 00 00 00 f0 1e 00  
   |.....(c.........|
   00000090  00 1b 28 53 08 00 e8 17  00 00 f0 1e 00 00 0a 0c  
   |..(S............|
   000000a0  1b 40 1b 28 52 08 00 00  52 45 4d 4f 54 45 31 4c  
   |.@.(R...REMOTE1L|
   000000b0  44 00 00 4a 45 01 00 00  1b 00 00 00              
   |D..JE.......|

   4.3.20 worked for us, but 4.3.21 doesn't. We are running on MacOS X 
   10.2.6. I used the following configure command to build gimpprint:
   configure --without-gimp --with-cups --without-modules --disable-nls 
   --disable-shared --disable-test

   To verify that the error is not in our application which is using
   the gimpprint library, I built a cups filter chain by hand in a
   shell, gimpprint's rastertoprint being the end of the chain. I did
   this test once with 4.3.20 and got loads of printdata as it should
   be. Then I did the same test with 4.3.21 and all I get is the
   output that I pasted above, which is obviously not a the printdata
   for a full page of content.

Could you send me the PPD file you're using?

-- 
Robert Krawitz                                     <rl...@al...>      

Tall Clubs International  --  http://www.tall.org/ or 1-888-IM-TALL-2
Member of the League for Programming Freedom -- mail lp...@uu...
Project lead for Gimp Print   --    http://gimp-print.sourceforge.net

"Linux doesn't dictate how I work, I dictate how Linux works."
--Eric Crampton