[Gerbv-devel] [ gerbv-Bugs-2885418 ] makefile error in cygwin
Brought to you by:
spetm,
thepurlieu
From: SourceForge.net <no...@so...> - 2009-10-27 01:50:35
|
Bugs item #2885418, was opened at 2009-10-24 20:27 Message generated for change (Comment added) made by zmq46 You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=409538&aid=2885418&group_id=33921 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: Build System Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: Nobody/Anonymous (nobody) Assigned to: Dan McMahill (danmc) Summary: makefile error in cygwin Initial Comment: When using build_gerbv --build-only, I get the following error. Building for cygwin. Makefile:36: *** commands commence before first target. Stop. ---------------------------------------------------------------------- Comment By: justin xia (zmq46) Date: 2009-10-27 09:50 Message: Sure, a windows xp application I'm doing now need libgerbv dll with a little change. Yes, I already seen "Removing spurious carriage returns in the Makefiles" on screen. I already took a look of makefile, there is nothing weird around line 36. Anyway I post ./win32/makefile here, # Makefile.in generated by automake 1.10 from Makefile.am. # win32/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. pkgdatadir = $(datadir)/gerbv pkglibdir = $(libdir)/gerbv pkgincludedir = $(includedir)/gerbv am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = i686-pc-cygwin host_triplet = i686-pc-cygwin subdir = win32 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(pkgdatadir)" pkgdataDATA_INSTALL = $(INSTALL_DATA) DATA = $(pkgdata_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = ${SHELL} /home/HP_Owner/missing --run aclocal-1.10 AMTAR = ${SHELL} /home/HP_Owner/missing --run tar AR = ar AUTOCONF = ${SHELL} /home/HP_Owner/missing --run autoconf AUTOHEADER = ${SHELL} /home/HP_Owner/missing --run autoheader AUTOMAKE = ${SHELL} /home/HP_Owner/missing --run automake-1.10 AWK = gawk CAIRO_CFLAGS = -Ic:/cygwin/home/HP_Owner/gtk_win32/include/cairo -Ic:/cygwin/home/HP_Owner/gtk_win32/include/freetype2 -Ic:/cygwin/home/HP_Owner/gtk_win32/include -Ic:/cygwin/home/HP_Owner/gtk_win32/include/libpng12 CAIRO_LIBS = -Lc:/cygwin/home/HP_Owner/gtk_win32/lib -lcairo CC = gcc CCDEPMODE = depmode=none CFLAGS = -I/home/HP_Owner/gtk_win32/include -mms-bitfields -mno-cygwin -mwindows -Wall -mms-bitfields -Ic:/cygwin/home/HP_Owner/gtk_win32/include/gtk-2.0 -Ic:/cygwin/home/HP_Owner/gtk_win32/lib/gtk-2.0/include -Ic:/cygwin/home/HP_Owner/gtk_win32/include/atk-1.0 -Ic:/cygwin/home/HP_Owner/gtk_win32/include/cairo -Ic:/cygwin/home/HP_Owner/gtk_win32/include/pango-1.0 -Ic:/cygwin/home/HP_Owner/gtk_win32/include/glib-2.0 -Ic:/cygwin/home/HP_Owner/gtk_win32/lib/glib-2.0/include -Ic:/cygwin/home/HP_Owner/gtk_win32/include/freetype2 -Ic:/cygwin/home/HP_Owner/gtk_win32/include -Ic:/cygwin/home/HP_Owner/gtk_win32/include/libpng12 -Ic:/cygwin/home/HP_Owner/gtk_win32/include/cairo -Ic:/cygwin/home/HP_Owner/gtk_win32/include/freetype2 -Ic:/cygwin/home/HP_Owner/gtk_win32/include -Ic:/cygwin/home/HP_Owner/gtk_win32/include/libpng12 CPP = gcc -E CPPFLAGS = -mms-bitfields -mno-cygwin -mwindows -DPREFIXDIR=\"${prefix}\" -DBINDIR=\"${bindir}\" CXX = g++ CXXCPP = g++ -E CXXDEPMODE = depmode=none CXXFLAGS = -g -O2 CYGPATH_W = cygpath -w DEFS = -DHAVE_CONFIG_H DEPDIR = .deps ECHO = echo ECHO_C = ECHO_N = -n ECHO_T = EGREP = /usr/bin/grep -E EXEEXT = .exe F77 = g77 FFLAGS = -g -O2 GREP = /usr/bin/grep GTK_CFLAGS = -mms-bitfields -Ic:/cygwin/home/HP_Owner/gtk_win32/include/gtk-2.0 -Ic:/cygwin/home/HP_Owner/gtk_win32/lib/gtk-2.0/include -Ic:/cygwin/home/HP_Owner/gtk_win32/include/atk-1.0 -Ic:/cygwin/home/HP_Owner/gtk_win32/include/cairo -Ic:/cygwin/home/HP_Owner/gtk_win32/include/pango-1.0 -Ic:/cygwin/home/HP_Owner/gtk_win32/include/glib-2.0 -Ic:/cygwin/home/HP_Owner/gtk_win32/lib/glib-2.0/include -Ic:/cygwin/home/HP_Owner/gtk_win32/include/freetype2 -Ic:/cygwin/home/HP_Owner/gtk_win32/include -Ic:/cygwin/home/HP_Owner/gtk_win32/include/libpng12 GTK_LIBS = -Lc:/cygwin/home/HP_Owner/gtk_win32/lib -lgtk-win32-2.0 -lgdk-win32-2.0 -latk-1.0 -lgio-2.0 -lgdk_pixbuf-2.0 -lpangowin32-1.0 -lgdi32 -lpangocairo-1.0 -lpango-1.0 -lcairo -lgobject-2.0 -lgmodule-2.0 -lglib-2.0 -lintl GTK_UPDATE_ICON_CACHE_BIN = true IM_ANIMATE = notfound IM_COMPARE = notfound IM_COMPOSITE = notfound IM_CONVERT = /cygdrive/c/WINDOWS/system32/convert IM_DISPLAY = notfound IM_MONTAGE = notfound INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LDFLAGS = -L/home/HP_Owner/gtk_win32/lib LIBOBJS = LIBS = -lm -lpng12 -Lc:/cygwin/home/HP_Owner/gtk_win32/lib -lgtk-win32-2.0 -lgdk-win32-2.0 -latk-1.0 -lgio-2.0 -lgdk_pixbuf-2.0 -lpangowin32-1.0 -lgdi32 -lpangocairo-1.0 -lpango-1.0 -lcairo -lgobject-2.0 -lgmodule-2.0 -lglib-2.0 -lintl -Lc:/cygwin/home/HP_Owner/gtk_win32/lib -lcairo LIBTOOL = $(SHELL) $(top_builddir)/libtool LN_S = ln -s LTLIBOBJS = MAINT = # MAKEINFO = ${SHELL} /home/HP_Owner/missing --run makeinfo MKDIR_P = /usr/bin/mkdir -p OBJEXT = o PACKAGE = gerbv PACKAGE_BUGREPORT = PACKAGE_NAME = gerbv PACKAGE_STRING = gerbv 2.3.0 PACKAGE_TARNAME = gerbv PACKAGE_VERSION = 2.3.0 PATH_SEPARATOR = : PKG_CONFIG = \cygwin\home\HP_Owner\gtk_win32\bin/pkg-config RANLIB = ranlib SETENV = /usr/bin/env SET_MAKE = SHELL = /bin/sh STRIP = strip UPDATE_DESKTOP_DATABASE = VERSION = 2.3.0 WIN32 = yes WINDRES = windres XDGDATADIR = ${datadir} abs_builddir = /home/HP_Owner/win32 abs_srcdir = /home/HP_Owner/win32 abs_top_builddir = /home/HP_Owner abs_top_srcdir = /home/HP_Owner ac_ct_CC = gcc ac_ct_CXX = g++ ac_ct_F77 = g77 am__include = include am__leading_dot = . am__quote = am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin build = i686-pc-cygwin build_alias = build_cpu = i686 build_os = cygwin build_vendor = pc builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = ${prefix} host = i686-pc-cygwin host_alias = host_cpu = i686 host_os = cygwin host_vendor = pc htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = $(SHELL) /home/HP_Owner/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = ${datarootdir}/man mkdir_p = /usr/bin/mkdir -p oldincludedir = /usr/include pdfdir = ${docdir} prefix = /home/HP_Owner/gerbv_inst program_transform_name = s,x,x, psdir = ${docdir} sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = . sysconfdir = ${prefix}/etc target_alias = top_builddir = .. top_srcdir = .. MAINTAINERCLEANFILES = *~ *.o Makefile Makefile.in EXTRA_DIST = build_gerbv extract_gtk_win32 gerbv.nsi.in Readme.txt \ registerExtension.nsh pkgdata_DATA = Readme.txt BUGS.txt COPYING.txt CLEANFILES = BUGS.txt COPYING.txt all: all-am .SUFFIXES: $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu win32/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: # $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): # $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-pkgdataDATA: $(pkgdata_DATA) @$(NORMAL_INSTALL) test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" @list='$(pkgdata_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(pkgdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgdatadir)/$$f'"; \ $(pkgdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgdatadir)/$$f"; \ done uninstall-pkgdataDATA: @$(NORMAL_UNINSTALL) @list='$(pkgdata_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(pkgdatadir)/$$f'"; \ rm -f "$(DESTDIR)$(pkgdatadir)/$$f"; \ done tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(pkgdatadir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-pkgdataDATA install-dvi: install-dvi-am install-exec-am: install-html: install-html-am install-info: install-info-am install-man: install-pdf: install-pdf-am install-ps: install-ps-am installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-pkgdataDATA .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ distclean distclean-generic distclean-libtool distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-pkgdataDATA install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ uninstall uninstall-am uninstall-pkgdataDATA BUGS.txt: $(top_srcdir)/BUGS awk '{print $$0 "\r"}' $(top_srcdir)/BUGS > $@ COPYING.txt: $(top_srcdir)/COPYING awk '{print $$0 "\r"}' $(top_srcdir)/COPYING > $@ # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: ---------------------------------------------------------------------- Comment By: Dan McMahill (danmc) Date: 2009-10-26 19:24 Message: weird. What you did should have worked. Could you post the top level Makefile so I can take a look and look for anything weird around line 36? About gd, http://www.libgd.org/releases/oldreleases/ has an older build. Just to make sure you're doing what you really want.... you do know that the build_gerbv script produces a non-cygwin version right? If you are running cygwin all the time and want a version of gerbv which uses X and/or has to use the cygwin dll, then you can just use the normal ./configure && make steps. For release versions of gerbv, there is a binary installer for windows on the SF page. But back to your problems, did you see a message go by on the console saying something about "Removing spurious carriage returns in the Makefiles"? I'm wondering if something in that step failed and if you have some CR's in your Makefile which should be just a LF only. ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2009-10-26 15:28 Message: >From http://www.gtk.org/download-windows.html, I cannot get any gd-*-win32.zip now. ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2009-10-26 14:54 Message: I downloaded the source code from http://sourceforge.net/projects/gerbv/files/gerbv/gerbv-2.3.0/gerbv-2.3.0.tar.gz, then unzip it and save all files into the folder of ~. I also downloaded glib, atk, pango, gtk+, gettext, libiconv, pkg-config etc. from www.gtk.org(for windows), and save all of these files to ~/gtk_win32_downloads. After that, I run cygwin, and run ./win32/extract_gtk_win32, it's all right now. then, run ./win32/build_gerbv --skip-install The following text in c.log: checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking build system type... i686-pc-cygwin checking host system type... i686-pc-cygwin checking for windows... yes checking whether build environment is sane... yes checking for gcc... gcc checking for C compiler default output file name... a.exe checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... .exe checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... none checking whether make sets $(MAKE)... (cached) yes checking for a BSD-compatible install... /usr/bin/install -c checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ld used by gcc... /usr/i686-pc-cygwin/bin/ld.exe checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... no checking dlfcn.h presence... no checking for dlfcn.h... no checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... none checking how to run the C++ preprocessor... g++ -E checking for g77... g77 checking whether we are using the GNU Fortran 77 compiler... yes checking whether g77 accepts -g... yes checking the maximum length of command line arguments... 8192 checking command to parse /usr/bin/nm -B output from gcc object... failed checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes checking whether -lc should be explicitly linked in... yes checking dynamic linker characteristics... Win32 ld.exe checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/i686-pc-cygwin/bin/ld.exe checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes checking whether the g++ linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes checking for g++ option to produce PIC... checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes checking dynamic linker characteristics... Win32 ld.exe checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for g77 option to produce PIC... checking if g77 static flag -static works... yes checking if g77 supports -c -o file.o... yes checking whether the g77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes checking dynamic linker characteristics... Win32 ld.exe checking how to hardcode library paths into programs... immediate checking for windres... windres checking for animate... notfound checking for compare... notfound checking for composite... notfound checking for convert... /cygdrive/c/WINDOWS/system32/convert checking for display... notfound checking for montage... notfound checking if all ImageMagick tools needed for the testsuite were found... no. The testsuite will be disabled because the following tools from the ImageMagick suite were not found: animate compare composite display montage No loss in gerbv functionality should be experienced, you just will not be able to run the regression testsuite. checking for pkg-config... \cygwin\home\HP_Owner\gtk_win32\bin/pkg-config checking for sin in -lm... yes checking pkg-config is at least version 0.9.0... yes checking for CAIRO... yes checking for GTK... yes checking if ElectricFence debugging should be enabled... no checking for env... /usr/bin/env checking for gtk-update-icon-path... true checking for unistd.h... (cached) yes checking getopt.h usability... yes checking getopt.h presence... yes checking for getopt.h... yes checking for string.h... (cached) yes checking sys/mman.h usability... no checking sys/mman.h presence... no checking for sys/mman.h... no checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking regex.h usability... no checking regex.h presence... no checking for regex.h... no checking libgen.h usability... yes checking libgen.h presence... yes checking for libgen.h... yes checking time.h usability... yes checking time.h presence... yes checking for time.h... yes checking for getopt_long... yes checking for strlwr... yes checking for realpath... no checking for canonicalize_file_name... no checking whether canonicalize_file_name must be declared... yes checking for the bindir to datadir relative path... ..\\share checking for the bindir to pkgdatadir relative path... ..\\share\\gerbv checking for the bindir to exec_prefix relative path... .. configure: creating ./config.status config.status: creating Makefile config.status: creating desktop/Makefile config.status: creating doc/PNG-print/Makefile config.status: creating doc/eagle/Makefile config.status: creating doc/html/Makefile config.status: creating doc/example-code/Makefile config.status: creating doc/Makefile config.status: creating example/eaglecad1/Makefile config.status: creating example/nollezappare/Makefile config.status: creating example/numpres/Makefile config.status: creating example/jj/Makefile config.status: creating example/dan/Makefile config.status: creating example/ekf2/Makefile config.status: creating example/exposure/Makefile config.status: creating example/am-test/Makefile config.status: creating example/cslk/Makefile config.status: creating example/orcad/Makefile config.status: creating example/Mentor-BoardStation/Makefile config.status: creating example/pick-and-place/Makefile config.status: creating example/polarity/Makefile config.status: creating example/thermal/Makefile config.status: creating example/trailing/Makefile config.status: creating example/Makefile config.status: creating man/Makefile config.status: creating scheme/Makefile config.status: creating src/Makefile config.status: creating src/libgerbv.pc config.status: creating win32/Makefile config.status: creating test/Makefile config.status: creating test/golden/Makefile config.status: creating test/inputs/Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands ** Configuration summary for gerbv 2.3.0: PREFIX: xdg data directory: ${datarootdir} CPPFLAGS: -mms-bitfields -mno-cygwin -mwindows -DPREFIXDIR=\"${prefix}\" -DBINDIR=\"${bindir}\" CFLAGS: -I/home/HP_Owner/gtk_win32/include -mms-bitfields -mno-cygwin -mwindows -Wall -mms-bitfields -Ic:/cygwin/home/HP_Owner/gtk_win32/include/gtk-2.0 -Ic:/cygwin/home/HP_Owner/gtk_win32/lib/gtk-2.0/include -Ic:/cygwin/home/HP_Owner/gtk_win32/include/atk-1.0 -Ic:/cygwin/home/HP_Owner/gtk_win32/include/cairo -Ic:/cygwin/home/HP_Owner/gtk_win32/include/pango-1.0 -Ic:/cygwin/home/HP_Owner/gtk_win32/include/glib-2.0 -Ic:/cygwin/home/HP_Owner/gtk_win32/lib/glib-2.0/include -Ic:/cygwin/home/HP_Owner/gtk_win32/include/freetype2 -Ic:/cygwin/home/HP_Owner/gtk_win32/include -Ic:/cygwin/home/HP_Owner/gtk_win32/include/libpng12 -Ic:/cygwin/home/HP_Owner/gtk_win32/include/cairo -Ic:/cygwin/home/HP_Owner/gtk_win32/include/freetype2 -Ic:/cygwin/home/HP_Owner/gtk_win32/include -Ic:/cygwin/home/HP_Owner/gtk_win32/include/libpng12 LDFLAGS: -L/home/HP_Owner/gtk_win32/lib LIBS: -lm -lpng12 -Lc:/cygwin/home/HP_Owner/gtk_win32/lib -lgtk-win32-2.0 -lgdk-win32-2.0 -latk-1.0 -lgio-2.0 -lgdk_pixbuf-2.0 -lpangowin32-1.0 -lgdi32 -lpangocairo-1.0 -lpango-1.0 -lcairo -lgobject-2.0 -lgmodule-2.0 -lglib-2.0 -lintl -Lc:/cygwin/home/HP_Owner/gtk_win32/lib -lcairo GTK Version: 2.16.6 Cairo Version: 1.8.8 Electric Fence Debugging: no and clean.log is Makefile:36: *** commands commence before first target. Stop. ---------------------------------------------------------------------- Comment By: Dan McMahill (danmc) Date: 2009-10-26 12:35 Message: I have everal questions. 1) how did you get the sources? Was this from the release tarball or via anoncvs? 2) What were your exact steps? Did you run build_gerbv --build-only before anything? It is not meant to run that way. There are several caveats related to that script. In fact, It isn't really meant for the end user but more for my use when building the binary releases. I stuck it in the releases so others can see how it is done but it is fairly fragile. In particular, it assumes specific locations for all the gtk stuff in your file system. Also, you have to run from the top of the source tree. For example ./win32/build_gerbv. The other thing is --build-only requires that you have let configure run first (sorry I'm not where I can look at the script to see if there was a config-only option). The whole purpose of --build-only was to help with my debugging because it sets up the PATH environment variable along with a few others before calling make. Anyway, without a little more to go on, I can only take gueses as to your problem Changing the state to pending since it is waiting for more information. -Dan ---------------------------------------------------------------------- Comment By: Stefan Petersen (spetm) Date: 2009-10-24 23:09 Message: Thanks for your bug report. I reassign it to our build systems expert Dan, because this is out of my league. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=409538&aid=2885418&group_id=33921 |