From: 蔡雷 <cai...@gm...> - 2009-12-03 12:39:40
|
Thanks so much, you are correct. As I am not willing to install a whole linux on my pc (maybe in the near future). I used the installer method, with rename the kernal and filesystem name to lenny. Now, able to boot whiite on my Wii :) However, just wonder if this lenny debian already enable the wifi? In "Configuring a wireless network connection<http://www.gc-linux.org/wiki/WL:Wifi_Configuration>", it writes: *You need the following userland packages in Debian to configure and operate the Nintendo Wii WLAN card: * - * wireless-tools * - * wpasupplicant (if you use WPA/WPA2 security) * - * udev (needed to service firmware image requests from the driver) * *You can issue the following commands as root from your Nintendo Wii to install those packages: * *whiite:~# apt-get update whiite:~# apt-get install udev wireless-tools wpasupplicant* But as I didn't get wifi work, how could I use "apt-get update". I know there should be a way to download on PC and copy on to Wii, then enable my wifi. It seems that I need to gain some Debian knowledge first. 2009/12/3 Albert Herranz <alb...@ya...> > >Hi > > > > Hi > > >This is the first time I use linux. I followed the steps in "Getting > Started with Linux on the Nintendo Wii: The whiite-linux system". > >Then I met the following errors when I use HBC trying to boot linux: > > Well, you didn't actually follow it :) > > >... > >... (It seems that the ext3 partition is mounted successfully through the > logs) > >... > >Warning : unable to open an initial console > >Kernel panic - not syncing : No init found. Try passing init = option to > kernel > >... > >...(after some trace dump, it says it will reboot in 180 sec) > >... > > > >One more thing, I use winrar to extract file system "from > debian-lenny-5.0+whiite-1.10.tar.bz2", it complains that some file already > exists, > >and I choose "Yes" to overwrite the existing files. I listed those files > as below: > > > >.\lib\libxt_MARK.so > >.\lib\xtables\libipt_set.so > >.\lib\xtables\libip6t_hl.so > >.\lib\xtables\libxt_TCPMSS.so > >.\lib\xtables\libxt_dscp.so > >.\lib\xtables\libxt_TOS.so > >.\lib\xtables\libxt_RATEEST.so > >.\lib\xtables\libxt_CONNMARK.so > >.\lib\xtables\libipt_ECN.so > >.\lib\xtables\libipt_TTL.so > > > > You need to use a proper tool to decompress the files. Winrar isn't. Use > tar as the wiki document explains. > > The "unable to open initial console" is caused by the failure of your > decompression tool to properly create device nodes. The other error maybe > caused by the failure of your tool to deal with links. > > >I wonder if that caused the problem ~> Anybody could give me some hint? > Many thanks. > > > > Just follow the wiki document. > > Cheers, > Albert > > > > > |