From: Jurgen K. <gtm...@in...> - 2007-04-13 17:39:07
|
On Fri, 2007-04-13 at 13:44 +0200, Pieter Palmers wrote: > Rich E wrote: > > Hi list, > > > > After getting both an Edirol FA-101 and a Focusrite Saffire 26 i/o > > working in Ubuntu Feisty Faun with good realtime results, I need to > > figure out how to lower the volume because it is blasting me away at the > > default settings ( I have XMMS' volume control set to 1% and it is still > > louder than I would like). > > > > I saw test apps test-mixer and test-volume in the latest svn version of > > freebob, so I compiled it and got 1.99 running fine. Can I lower the > > volume with one of these, and if so can someone give some hints on how? > > I don't know what NODE_ID and FB_ID are.. > > The mixer code in freebob doesn't work. The development was is switched > over to the FFADO project, and in that codebase there is some basic > mixer control support. It is however very preliminary. > > You can get the current FFADO repository at: > http://subversion.ffado.org/ffado/trunk/libffado > > You can install it without removing freebob, they don't interfere. > > Please follow the instructions at: > http://subversion.ffado.org/index.fcgi/wiki/ObtainingAvcModel > to obtain the AV/C model for your device. > > If you upload it to > http://subversion.ffado.org/index.fcgi/wiki/AvcModels > > I can build a quick & dirty mixer for you. > > note: you can get an account for the devel wiki by registering at > http://www.ffado.org. You can use the same username and password. > I've just managed to add the info for the Edirol FA-66. Can someone remove the attachment from page http://subversion.ffado.org/index.fcgi/wiki/AvcModels ? It does not belong there (my bad). BTW I was able to edit (read screw up) that page without being logged in! CU Jurgen |