Re: [Etherboot-users] BOOT ROM doesn't work on the ISA card
Brought to you by:
marty_connor,
stefanhajnoczi
From: Igor M. <i.m...@sw...> - 2004-11-30 13:50:42
|
>>>You didn't put a 32kB or 64kB ROM in a 16kB slot I hope? >> >>I made 16K ROM image and programmed it into 32kB Flash (Atmel AT29C256, DIP28 >>, >>70ns). > > > Maybe you programmed the wrong half. Or this EEPROM isn't suitable for > this NIC due the logic level that the NIC puts on the enable pin. Try an > EPROM. I've just check it with NM27C256Q EPROM (32K) programmed with Etherboot ROM code for a SMC9000 NIC, the result is the same - it work from the PCI NIC's boot rom socket (RTL8139D, 32K boot rom is activated) but it doesn't work for the ISA card. Regards, Igor. |