From: John K. <jmk...@us...> - 2004-07-23 01:55:38
|
Update of /cvsroot/emc/documents/lyx In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv13432 Modified Files: Hal_Introduction.lyx Log Message: fixed some documentation error spotted by Alex Joni - thanks Alex Index: Hal_Introduction.lyx =================================================================== RCS file: /cvsroot/emc/documents/lyx/Hal_Introduction.lyx,v retrieving revision 1.26 retrieving revision 1.27 diff -C2 -d -r1.26 -r1.27 *** Hal_Introduction.lyx 19 Jun 2004 20:42:42 -0000 1.26 --- Hal_Introduction.lyx 23 Jul 2004 01:55:28 -0000 1.27 *************** *** 2031,2036 **** At this point we have the siggen component loaded and running. It's time to start halmeter. ! Since halmeter is a GUI app, we can start it in the background by following ! it's name with a ' \family typewriter & --- 2031,2036 ---- At this point we have the siggen component loaded and running. It's time to start halmeter. ! Since halmeter is a GUI app, X must be running. ! We can start halmeter in the background by following it's name with a ' \family typewriter & *************** *** 2198,2202 **** button in the source selection dialog. Click on 'Select' to open the dialog again. ! This time, click on another pin, like siggen.1.cosine, and then click 'Accept'. When you click 'Accept', the meter immediately begins to display the newly selected item, but the dialog does not close. --- 2198,2202 ---- button in the source selection dialog. Click on 'Select' to open the dialog again. ! This time, click on another pin, like siggen.0.cosine, and then click 'Accept'. When you click 'Accept', the meter immediately begins to display the newly selected item, but the dialog does not close. *************** *** 2799,2803 **** \layout Standard ! Tthe main function for the step pulse generator is \family typewriter freqgen.make_pulses --- 2799,2803 ---- \layout Standard ! The main function for the step pulse generator is \family typewriter freqgen.make_pulses *************** *** 7162,7167 **** \layout Standard ! This example installs drivers for one port at 0x0378, with pins 2-9 as inputs, ! and two ports at 0x0278 and 0x20A0, with pins 2-9 as outputs. Note that you must know the base address of the parallel port to properly configure the driver. --- 7162,7184 ---- \layout Standard ! This example installs drivers for one port at 0x0278, with pins 2-9 as outputs ! (by default, since neither ! \begin_inset Quotes eld ! \end_inset ! ! in ! \begin_inset Quotes erd ! \end_inset ! ! nor ! \begin_inset Quotes eld ! \end_inset ! ! out ! \begin_inset Quotes erd ! \end_inset ! ! was specified), one at 0x0378, with pins 2-9 as inputs, and one at 0x20A0, ! with pins 2-9 explicitly specified as outputs. Note that you must know the base address of the parallel port to properly configure the driver. |