Re: [Emc-developers] Auto-updating to JA4

[Charles S. <ch...@st...>]

On 12/20/2013 4:57 PM, andy pugh wrote:
> On 20 December 2013 22:34, Charles Steinkuehler <ch...@st...>wrote:
> 
>> These values are in the original ini file, but commented out.
> 
> No plan survives contact with the Users...
> Yes, I need to check for a "None" return. I hadn't even considered the
> possibility if working configs with no limits set.

I just tried your script again with a different configuration, my
BeBoPr-Bridge setup from:

https://github.com/cdsteinkuehler/linuxcnc/tree/MachineKit-ubc/configs/ARM/BeagleBone/BeBoPr-Bridge

...and all seems well.  LinuxCNC launched without any manual tweaks to
the configuration required.  This configuration had limits setup for all
the axis, unlike the K9 configuration I tried first.

Thanks again for the script, it's already saved me a lot of time!

-- 
Charles Steinkuehler
ch...@st...