From: John T. <bj...@gm...> - 2013-10-15 11:34:41
|
I have some pyvcp buttons on my lathe to change tools, however the ladder logic handles the turret so no manual tool change is used. On the BP knee mill I have a macro that I just enter the number of the tool and then try and press the tiny little ok button on the manual tool change window on my touch screen. JT On 10/14/2013 10:57 AM, andy pugh wrote: > Currently my mill is set up with immediate tool change. As in, I > manually change a tool and then type M6TNG43 in the MDI window. I > intend to change this soon, probably this evening. > What I would quite like to do is have a GladeVCP window for > tool-changing, to save my typing in to the MDI window. But on this > inteface I don't want to have to "OK" the manual toolchange dialog > box. > > However, I obviously would want the machine to pause and the manual > toolchange dialog to pop up if this was an M6 inside a G-code program. > > I am thinking in terms of some HAL logic to cut manual_toolchange out > of the loop if program-is-running is true. Before I waste time setting > this up, does anyone know if this will work? I guess it is important > that program-is-running stays true through a toolchange... > |