[Emc-users] difficulty compiling emc2 master

[Daniel R. <rog...@gm...>]

Hello all,

My name is Rogge - I've been a watcher on this list for some time, but this
is my first post to the list.

I have a quick question regarding compiling the latest source code.  I have
diligently followed the instructions given here (
http://linuxcnc.org/docs/html/install_compiling_emc2.html) and here (
http://wiki.linuxcnc.org/emcinfo.pl?Installing_EMC2).  I started with the
most recent live CD, then installed git and used it to get the current
source (git clone git://git.linuxcnc.org/git/emc2.git emc2-dev).  Autogen.sh
seems to complete successfully.  When I try to configure (./configure or
./configure --enable-run-in-place) I run into problems.  Several components
seem to be missing from the source:

checking for adeos... not found
checking for rtai_hal... /usr/realtime-2.6.32-122-rtai/modules/rtai_hal.ko
checking for rtai_ksched...
/usr/realtime-2.6.32-122-rtai/modules/rtai_ksched.ko
checking for rtai_fifos...
/usr/realtime-2.6.32-122-rtai/modules/rtai_fifos.ko
checking for rtai_shm... not found
checking for rtai_sem... /usr/realtime-2.6.32-122-rtai/modules/rtai_sem.ko
checking for rtai_math... /usr/realtime-2.6.32-122-rtai/modules/rtai_math.ko
checking for rtai... not found
checking for rt_mem_mgr... not found
checking for rtai_sched...
/usr/realtime-2.6.32-122-rtai/modules/rtai_sched.ko
checking for rtai_libm... not found
checking for rtl... not found
checking for mbuff... not found
checking for rtl_time... not found
checking for rtl_sched... not found
checking for rtl_posixio... not found
checking for rtl_fifo... not found
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking for semtimedop... yes
checking for sincos... yes
checking for __sincos... no
checking for tcl... /usr/lib/tcl8.5/tclConfig.sh found
checking for tk... /usr/lib/tk8.5/tkConfig.sh found
checking for BWidget using /usr/bin/tclsh8.5... found
checking for Img using /usr/bin/tclsh8.5... configure: error: not found

I have successfully checked out and compiled an older version (2.4.0).

Any direction would be greatly appreciated.  I'm trying to play around with
GladeVCP and I understand that it is only available in 2.5 (hence the
attempt to compile the latest code).

Thank you very much!

Rogge