[Emc-commit] v2.4_branch: Update description how to disable serial port linux driver

[Michael G. <gi...@gi...>]

Update description how to disable serial port linux driver

Signed-off-by: Michael Geszkiewicz <mi...@wp...>


http://git.linuxcnc.org/?p=emc2.git;a=commitdiff;h=b4fe613

---
 src/hal/drivers/serport.comp |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/src/hal/drivers/serport.comp b/src/hal/drivers/serport.comp
index 01c7d0a..52c850b 100644
--- a/src/hal/drivers/serport.comp
+++ b/src/hal/drivers/serport.comp
@@ -9,7 +9,7 @@ Specify the I/O address of the serial ports using the module parameter
 To free up the I/O ports after bootup, install setserial and execute a command
 like:
 .RS 
-sudo setserial /dev/ttyS0 none
+sudo setserial /dev/ttyS0 uart none
 .RE
 but it is best to ensure that the serial port is never used or configured by
 the Linux kernel by setting a kernel commandline parameter or not loading