[Emc-commit] v2.4_branch: add missing pin

[John T. <gi...@gi...>]

add missing pin

Signed-off-by: John Thornton <bj...@gm...>


http://git.linuxcnc.org/?p=emc2.git;a=commitdiff;h=9f5cc40

---
 docs/src/gui/halui.lyx |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/docs/src/gui/halui.lyx b/docs/src/gui/halui.lyx
index 0ed87f8..139f9d7 100644
--- a/docs/src/gui/halui.lyx
+++ b/docs/src/gui/halui.lyx
@@ -486,6 +486,10 @@ halui.mode.is-joint (bit, out) - pin showing joint by joint jog mode is on
 \end_layout
 
 \begin_layout Itemize
+halui.mode.manual (bit, in) - pin for requesting manual mode
+\end_layout
+
+\begin_layout Itemize
 halui.mode.is-manual (bit, out) - indicates manual mode is on
 \end_layout