[Emc-users] Upgrading from 2.3.9 to 2.3.4

[Donnie T. <dti...@et...>]

I had to replace the PC on my mill so while was at it I thought it would be
a good time update to 2.3.4, I'm run on a Mesa 5i23 with a 7i33 and a 7i37.
I'm still new to linux.

 

I installed EMC2 from a live CD to the new computer and update to the 2.3.4
version then load my old INI and Hal file only to have it fail to start
Saying there was no PIN hm2_5i23.0.gpio.P3.040.is_output 1 I found that the
P3 had to be dropped.

 

I'm still faulting out what else do I have to change the sample files seam
to work.

 

Debug contains

 

6711

  PID TTY      STAT   TIME COMMAND

6833

  PID TTY      STAT   TIME COMMAND

 6833 pts/0    RL+    0:04 milltask -ini
/home/donnie/emc2/configs/hurco/m5i23.ini

  PID TTY      STAT   TIME COMMAND

 6833 pts/0    RL+    0:04 milltask -ini
/home/donnie/emc2/configs/hurco/m5i23.ini

  PID TTY      STAT   TIME COMMAND

 6833 pts/0    RL+    0:04 milltask -ini
/home/donnie/emc2/configs/hurco/m5i23.ini

  PID TTY      STAT   TIME COMMAND

 6833 pts/0    RL+    0:04 milltask -ini
/home/donnie/emc2/configs/hurco/m5i23.ini

  PID TTY      STAT   TIME COMMAND

 6833 pts/0    RL+    0:04 milltask -ini
/home/donnie/emc2/configs/hurco/m5i23.ini

  PID TTY      STAT   TIME COMMAND

 6833 pts/0    RL+    0:04 milltask -ini
/home/donnie/emc2/configs/hurco/m5i23.ini

  PID TTY      STAT   TIME COMMAND

 6833 pts/0    RL+    0:05 milltask -ini
/home/donnie/emc2/configs/hurco/m5i23.ini

  PID TTY      STAT   TIME COMMAND

 6833 pts/0    RL+    0:05 milltask -ini
/home/donnie/emc2/configs/hurco/m5i23.ini

  PID TTY      STAT   TIME COMMAND

Stopping realtime threads

Unloading hal components

 

Print_Txt contains

 

RUN_IN_PLACE=no

EMC2_DIR=

EMC2_BIN_DIR=/usr/bin

EMC2_TCL_DIR=/usr/share/emc/tcl

EMC2_SCRIPT_DIR=

EMC2_RTLIB_DIR=/usr/realtime-2.6.24-16-rtai/modules/emc2

EMC2_CONFIG_DIR=

EMC2_LANG_DIR=/usr/share/emc/tcl/msgs

INIVAR=inivar

HALCMD=halcmd

EMC2_EMCSH=emcsh

EMC2_IOSH=iosh

INIFILE=/home/donnie/emc2/configs/hurco/m5i23.ini

PARAMETER_FILE=m5i23.var

EMCMOT=motmod

EMCIO=io

TASK=milltask

HALUI=

DISPLAY=axis

NML_FILE=emc.nml

Starting EMC2 server program: emcsvr

Loading Real Time OS, RTAPI, and HAL_LIB modules

Starting EMC2 IO program: io

Starting EMC2 TASK program: milltask

Starting EMC2 DISPLAY program: axis

Killing task emcsvr, PID=6711

Killing task milltask, PID=6833

Removing HAL_LIB, RTAPI, and Real Time OS modules

Removing NML shared memory segments

 

 

The last part of dmesg is

 

[ 1285.720718] hm2/hm2_5i23.0:         output_invert = 0x000000

[ 1285.720720] hm2/hm2_5i23.0: Watchdog: 1

[ 1285.720724] hm2/hm2_5i23.0:     clock_frequency: 48000000 Hz (48.000 MHz)

[ 1285.720726] hm2/hm2_5i23.0:     version: 0

[ 1285.720728] hm2/hm2_5i23.0:     timer_addr: 0x0C00

[ 1285.720731] hm2/hm2_5i23.0:     status_addr: 0x0D00

[ 1285.720733] hm2/hm2_5i23.0:     reset_addr: 0x0E00

[ 1285.720735] hm2/hm2_5i23.0:     instance 0:

[ 1285.720738] hm2/hm2_5i23.0:         param timeout_ns = 1000000000

[ 1285.720740] hm2/hm2_5i23.0:         pin has_bit = 0

[ 1285.720743] hm2/hm2_5i23.0:         reg timer = 0x02DC6BFF

[ 1285.720928] hm2/hm2_5i23.0: registered

[ 1285.720932] hm2_5i23.0: initialized AnyIO board at 0000:01:07.0

[ 1296.070752] hm2_5i23.0: dropping AnyIO board at 0000:01:07.0

[ 1296.070761] hm2/hm2_5i23.0: unregistered

[ 1296.073489] hm2_pci: driver unloaded

[ 1296.078898] hm2: unloading

[ 1296.279159] RTAI[math]: unloaded.

[ 1296.341572] SCHED releases registered named ALIEN RTGLBH

[ 1296.357222] RTAI[malloc]: unloaded.

[ 1296.456719] RTAI[sched]: unloaded (forced hard/soft/hard transitions:
traps 0, syscalls 0).

[ 1296.460142] I-pipe: Domain RTAI unregistered.

[ 1296.460152] RTAI[hal]: unmounted.

donnie@donnie-desktop:~$